What is the low beam headlight bulb size for a 1996 Nissan 200SX?

The 1996 Nissan 200SX uses a 9004 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1996 Nissan 200SX?

The high beam bulb size for the 1996 Nissan 200SX is 9004 LED.

Why are my 1996 Nissan 200SX headlights dim?

Dim headlights on a 1996 Nissan 200SX can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1996 Nissan 200SX fog light?

The 1996 Nissan 200SX uses a H3 LED bulb for the fog light position.

Is the 1996 Nissan 200SX single or dual beam?

The 1996 Nissan 200SX uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1996 Nissan 200SX?

Yes, the 1996 Nissan 200SX comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED LED conversion kit for the low beams.

Does the 1996 Nissan 200SX have fog lights?

Yes, the 1996 Nissan 200SX takes a H3 LED bulb for the fog light position.

Did the 1996 Nissan 200SX change headlight bulb sizes from the previous year?

No — the 1996 Nissan 200SX uses the same bulb sizes as the 1995 model. This configuration has been consistent across the 1995–1997 generation.

How do I change the headlight on a 1996 Nissan 200SX?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1996 Nissan 200SX?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1996 Nissan 200SX headlights?

A pair of halogen 9004 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1996 Nissan 200SX?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 LED position are available as direct plug-and-play replacements.

The 1996 Nissan 200SX shares its bulb sizes with the 1995–1997 generation.

Fitment Guaranteed for 1996 Nissan 200SX

What Size Bulbs Does a 1996 Nissan 200SX Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1996 Nissan 200SX Have?

Lighting on the 1996 Nissan 200SX is managed by a total of 12 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a halogen-based setup where a single 9004 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the late years of the 200SX's 1977-1998 production span.

Can You Put LED Bulbs in a 1996 Nissan 200SX?

Upgrading to LED is one of the most effective ways to modernize your Nissan's appearance and safety profile. Since your 200SX uses a single 9004 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the H3 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1996 Nissan 200SX Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9004 LED	Buy 9004 LED →
High Beam	9004 LED	Buy 9004 LED →
Fog Light	H3 LED	Buy H3 LED →
Brake Light	912	Buy 912 →
Turn Signal Front	1157NA	Buy 1157NA →
Turn Signal Rear	1156	Buy 1156 →
Dome Light	DE3175	Buy DE3175 →
License Plate	168	Buy 168 →
Parking Light	1157A	Buy 1157A →
Reverse Light	1156	Buy 1156 →
Trunk Light	158	Buy 158 →
Tail Light	1157	Buy 1157 →

How do the 1996 Nissan 200SX's bulbs compare to other years?

The 1996 Nissan 200SX uses the same bulbs as the 1995 model.

The 1997 model continues with the same bulb sizes.

This bulb configuration covers the 1995–1997 model years. ← 1995 1997 →

Finding the best installation guide...

Other 200SX Years

1998 1997 1995 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977

More from Nissan

1200 210 240SX 240Z 260Z 280Z 280ZX 300ZX

Other Vehicles That Use 9004 LED Bulbs

2005 Chevrolet Venture 2003 Isuzu Rodeo Sport 2002 Dodge Ram 2500 2002 Dodge Ram 3500 2002 Isuzu Trooper 1999 Acura SLX