What is the low beam headlight bulb size for a 1996 Mazda MX-3?

The 1996 Mazda MX-3 uses a 9004 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1996 Mazda MX-3?

The high beam bulb size for the 1996 Mazda MX-3 is 9004 LED.

Why are my 1996 Mazda MX-3 headlights dim?

Dim headlights on a 1996 Mazda MX-3 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1996 Mazda MX-3 fog light?

The 1996 Mazda MX-3 uses a LED Fog Light bulb for the fog light position.

Is the 1996 Mazda MX-3 single or dual beam?

The 1996 Mazda MX-3 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1996 Mazda MX-3?

Yes, the 1996 Mazda MX-3 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED LED conversion kit for the low beams.

Does the 1996 Mazda MX-3 have fog lights?

Yes, the 1996 Mazda MX-3 takes a LED Fog Light bulb for the fog light position.

Did the 1996 Mazda MX-3 change headlight bulb sizes from the previous year?

No — the 1996 Mazda MX-3 uses the same bulb sizes as the 1995 model. This configuration has been consistent across the 1995–1996 generation.

Is the 1996 Mazda MX-3 the first or last year to use 9004 LED bulbs?

The 1996 Mazda MX-3 is the last year in the 1995–1996 generation to use the 9004 LED bulb for the low beam headlight.

How do I change the headlight on a 1996 Mazda MX-3?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1996 Mazda MX-3?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1996 Mazda MX-3 headlights?

A pair of halogen 9004 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1996 Mazda MX-3?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 LED position are available as direct plug-and-play replacements.

The 1996 Mazda MX-3 is the last model year to use this bulb configuration (1995–1996).

Fitment Guaranteed for 1996 Mazda MX-3

What Size Bulbs Does a 1996 Mazda MX-3 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1996 Mazda MX-3 Have?

When it comes to nighttime visibility, the 1996 Mazda MX-3 relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single 9004 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the late years of the MX-3's 1992-1996 production span.

Can You Put LED Bulbs in a 1996 Mazda MX-3?

Upgrading to LED is one of the most effective ways to modernize your Mazda's appearance and safety profile. Since your MX-3 uses a single 9004 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1996 Mazda MX-3 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9004 LED	Buy 9004 LED →
High Beam	9004 LED	Buy 9004 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	921 LED	Buy 921 LED →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	1157 LED	Buy 1157 LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Dome Light	168	Buy 168 →
License Plate	168	Buy 168 →
Parking Light	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
Trunk Light	DE3022	Buy DE3022 →
Tail Light	1157	Buy 1157 →

How do the 1996 Mazda MX-3's bulbs compare to other years?

The 1996 Mazda MX-3 uses the same bulbs as the 1995 model.

This bulb configuration covers the 1995–1996 model years. ← 1995

Finding the best installation guide...

Other MX-3 Years

1995 1994 1993 1992

More from Mazda

2 3 3 H/Back 3 Sedan 3 Sport 323 5 6

Other Vehicles That Use 9004 LED Bulbs

2005 Chevrolet Venture 2003 Isuzu Rodeo Sport 2002 Dodge Ram 2500 2002 Dodge Ram 3500 2002 Isuzu Trooper 2001 Nissan Xterra