What is the low beam headlight bulb size for a 1988 Mazda B2200?

The 1988 Mazda B2200 uses a H6054 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1988 Mazda B2200?

The high beam bulb size for the 1988 Mazda B2200 is N/A.

Why are my 1988 Mazda B2200 headlights dim?

Dim headlights on a 1988 Mazda B2200 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6054 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1988 Mazda B2200 fog light?

The 1988 Mazda B2200 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1988 Mazda B2200 single or dual beam?

The 1988 Mazda B2200 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1988 Mazda B2200?

Yes, the 1988 Mazda B2200 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6054 LED conversion kit for the low beams.

Did the 1988 Mazda B2200 change headlight bulb sizes from the previous year?

Yes — the 1988 Mazda B2200 uses different bulb sizes than the 1987 model. The 1988 generation introduced this bulb configuration.

Is the 1988 Mazda B2200 the first or last year to use H6054 bulbs?

The 1988 Mazda B2200 is the only year in the 1988 generation to use the H6054 bulb for the low beam headlight.

How do I change the headlight on a 1988 Mazda B2200?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6054 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1988 Mazda B2200?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6054 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1988 Mazda B2200 headlights?

A pair of halogen H6054 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1988 Mazda B2200?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6054 position are available as direct plug-and-play replacements.

The 1988 Mazda B2200 has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1988 Mazda B2200

What Size Bulbs Does a 1988 Mazda B2200 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1988 Mazda B2200 Have?

Owners of the 1988 Mazda B2200 will find a total of 6 lighting elements throughout the vehicle's exterior. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H6054 low beam and high beam bulbs for precise light distribution. This model belongs to the mid years of the B2200's 1982-1993 production span.

Can You Put LED Bulbs in a 1988 Mazda B2200?

Upgrading to LED is one of the most effective ways to modernize your Mazda's appearance and safety profile. We recommend starting your upgrade with the H6054 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance.

1988 Mazda B2200 Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	1156	Buy 1156 →
Low Beam	H6054	Buy H6054 →
Tail Light	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
Turn Signal Rear	1156	Buy 1156 →
Brake Light	1157	Buy 1157 →

How do the 1988 Mazda B2200's bulbs compare to other years?

The 1988 Mazda B2200 changed bulb sizes from 1987. The previous model year used a different configuration.

The 1989 model switched to a different bulb configuration.

This bulb configuration covers the 1988 model years. ← 1987 1989 →

Finding the best installation guide...

Other B2200 Years

1993 1991 1990 1989 1987 1984 1983 1982

More from Mazda

2 3 3 H/Back 3 Sedan 3 Sport 323 5 6

Other Vehicles That Use H6054 Bulbs

2020 Chevrolet Express 2500 2020 Chevrolet Express 3500 2016 Ford E350 2015 Ford E-450 Super Duty 2011 Ford E150-E350 2010 Ford F-350 Super Duty