What is the low beam headlight bulb size for a 1976 Mazda 808?

The 1976 Mazda 808 uses a 6014 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1976 Mazda 808?

The high beam bulb size for the 1976 Mazda 808 is 6014 LED.

Why are my 1976 Mazda 808 headlights dim?

Dim headlights on a 1976 Mazda 808 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 6014 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1976 Mazda 808 fog light?

The 1976 Mazda 808 uses a LED Fog Light bulb for the fog light position.

Is the 1976 Mazda 808 single or dual beam?

The 1976 Mazda 808 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1976 Mazda 808?

Yes, the 1976 Mazda 808 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 6014 LED LED conversion kit for the low beams.

Does the 1976 Mazda 808 have fog lights?

Yes, the 1976 Mazda 808 takes a LED Fog Light bulb for the fog light position.

Did the 1976 Mazda 808 change headlight bulb sizes from the previous year?

Yes — the 1976 Mazda 808 uses different bulb sizes than the 1975 model. The 1976–1977 generation introduced this bulb configuration.

Is the 1976 Mazda 808 the first or last year to use 6014 LED bulbs?

The 1976 Mazda 808 is the first year in the 1976–1977 generation to use the 6014 LED bulb for the low beam headlight.

How do I change the headlight on a 1976 Mazda 808?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 6014 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1976 Mazda 808?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 6014 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1976 Mazda 808 headlights?

A pair of halogen 6014 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1976 Mazda 808?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 6014 LED position are available as direct plug-and-play replacements.

The 1976 Mazda 808 is the first model year to use this bulb configuration (1976–1977).

Fitment Guaranteed for 1976 Mazda 808

What Size Bulbs Does a 1976 Mazda 808 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1976 Mazda 808 Have?

The 1976 Mazda 808 utilizes a refined lighting configuration featuring 12 distinct bulb positions. It features an extensive lighting system powered by a halogen-based setup where a single 6014 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the late years of the 808's 1972-1977 production span.

Can You Put LED Bulbs in a 1976 Mazda 808?

Upgrading to LED is one of the most effective ways to modernize your Mazda's appearance and safety profile. Since your 808 uses a single 6014 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1976 Mazda 808 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	6014 LED	Buy 6014 LED →
High Beam	6014 LED	Buy 6014 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	LED Brake Light Assembly	Buy LED Brake Light Assembly →
Side Marker	89 LED	Buy 89 LED →
Turn Signal Front	1157 LED	Buy 1157 LED →
Turn Signal Rear	1157 LED	Buy 1157 LED →
License Plate	97	Buy 97 →
Parking Light	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
Trunk Light	LED Light	Buy LED Light →
Tail Light	1157	Buy 1157 →

How do the 1976 Mazda 808's bulbs compare to other years?

The 1976 Mazda 808 changed bulb sizes from 1975. The previous model year used a different configuration.

The 1977 model continues with the same bulb sizes.

This bulb configuration covers the 1976–1977 model years. ← 1975 1977 →

Finding the best installation guide...

Other 808 Years

1977 1975 1974 1973 1972

More from Mazda

2 3 3 H/Back 3 Sedan 3 Sport 323 5 6

Other Vehicles That Use 6014 LED Bulbs

1987 Toyota Land Cruiser 1986 Isuzu Trooper 1980 Toyota Cressida 1980 Volkswagen Super Beetle 1979 Volkswagen Transporter 1978 Nissan 280Z