What is the low beam headlight bulb size for a 2010 Land Rover LR4?

The 2010 Land Rover LR4 uses a H7 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2010 Land Rover LR4?

The high beam bulb size for the 2010 Land Rover LR4 is H7.

Why are my 2010 Land Rover LR4 headlights dim?

Dim headlights on a 2010 Land Rover LR4 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H7 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2010 Land Rover LR4 fog light?

The 2010 Land Rover LR4 uses a H11 bulb for the fog light position.

Is the 2010 Land Rover LR4 single or dual beam?

The 2010 Land Rover LR4 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2010 Land Rover LR4?

Yes, the 2010 Land Rover LR4 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H7 LED conversion kit for the low beams.

Does the 2010 Land Rover LR4 have fog lights?

Yes, the 2010 Land Rover LR4 takes a H11 bulb for the fog light position.

How do I change the headlight on a 2010 Land Rover LR4?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H7 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2010 Land Rover LR4?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H7 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2010 Land Rover LR4 headlights?

A pair of halogen H7 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2010 Land Rover LR4?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H7 position are available as direct plug-and-play replacements.

The 2010 Land-Rover LR4 is the first model year to use this bulb configuration (2010–2011).

Fitment Guaranteed for 2010 Land-Rover LR4

What Size Bulbs Does a 2010 Land-Rover LR4 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2010 Land-Rover LR4 Have?

When it comes to nighttime visibility, the 2010 Land-Rover LR4 relies on an arrangement of 6 specialized bulbs. It features a standard lighting system powered by a halogen-based setup where a single H7 dual-filament bulb handles both low and high beam duties within the same reflector.

Can You Put LED Bulbs in a 2010 Land-Rover LR4?

Upgrading to LED is one of the most effective ways to modernize your Land-Rover's appearance and safety profile. Since your LR4 uses a single H7 bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the H11 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.