What is the low beam headlight bulb size for a 2020 Jeep Renegade?

The 2020 Jeep Renegade uses a H13 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2020 Jeep Renegade?

The high beam bulb size for the 2020 Jeep Renegade is N/A.

Why are my 2020 Jeep Renegade headlights dim?

Dim headlights on a 2020 Jeep Renegade can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H13 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2020 Jeep Renegade fog light?

The 2020 Jeep Renegade uses a H11 bulb for the fog light position.

Is the 2020 Jeep Renegade single or dual beam?

The 2020 Jeep Renegade uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2020 Jeep Renegade?

Yes, the 2020 Jeep Renegade comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H13 LED conversion kit for the low beams.

Does the 2020 Jeep Renegade have fog lights?

Yes, the 2020 Jeep Renegade takes a H11 bulb for the fog light position.

Did the 2020 Jeep Renegade change headlight bulb sizes from the previous year?

Yes — the 2020 Jeep Renegade uses different bulb sizes than the 2019 model. The 2020 generation introduced this bulb configuration.

Is the 2020 Jeep Renegade the first or last year to use H13 bulbs?

The 2020 Jeep Renegade is the only year in the 2020 generation to use the H13 bulb for the low beam headlight.

How do I change the headlight on a 2020 Jeep Renegade?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H13 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2020 Jeep Renegade?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H13 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2020 Jeep Renegade headlights?

A pair of halogen H13 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2020 Jeep Renegade?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H13 position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2020 Jeep Renegade has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2020 Jeep Renegade

What Size Bulbs Does a 2020 Jeep Renegade Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Moderate (Dust covers often present)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2020 Jeep Renegade Have?

When it comes to nighttime visibility, the 2020 Jeep Renegade relies on an arrangement of 8 specialized bulbs. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate H13 low beam and high beam bulbs for precise light distribution. This model belongs to the mid years of the Renegade's 2015-2022 production span. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2020 Jeep Renegade?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H13 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H11 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2020 Jeep Renegade Bulb Size Chart

Position	Bulb Size	Shop
Daytime Running	7528	Buy 7528 →
Fog Light	H11	Buy H11 →
Low Beam	H13	Buy H13 →
Turn Signal Front	7507	Buy 7507 →
Parking Light	7528	Buy 7528 →
Reverse Light	921	Buy 921 →
License Plate	W5W	Buy W5W →
Map Light	W5W	Buy W5W →

How do the 2020 Jeep Renegade's bulbs compare to other years?

The 2020 Jeep Renegade changed bulb sizes from 2019. The previous model year used a different configuration.

The 2021 model switched to a different bulb configuration.

This bulb configuration covers the 2020 model years. ← 2019 2021 →

Finding the best installation guide...

Other Renegade Years

2022 2021 2019 2018 2017 2016 2015

Other Vehicles That Use H13 Bulbs

2022 Ford E-350 Super Duty 2022 Ford F-250 Super Duty 2022 Ford F-350 Super Duty 2022 Ford F-450 Super Duty 2022 Ford F-550 Super Duty 2022 Ford F-600 Super Duty

H13 Comparisons

9008 vs H13