What is the low beam headlight bulb size for a 2018 Jeep Renegade?

The 2018 Jeep Renegade uses a HID-D5S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2018 Jeep Renegade?

The high beam bulb size for the 2018 Jeep Renegade is H13 LED.

Why are my 2018 Jeep Renegade headlights dim?

Dim headlights on a 2018 Jeep Renegade can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D5S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2018 Jeep Renegade fog light?

The 2018 Jeep Renegade uses a H11 LED bulb for the fog light position.

Is the 2018 Jeep Renegade single or dual beam?

The 2018 Jeep Renegade uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2018 Jeep Renegade?

Yes, the 2018 Jeep Renegade comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D5S LED LED conversion kit for the low beams.

Does the 2018 Jeep Renegade have fog lights?

Yes, the 2018 Jeep Renegade takes a H11 LED bulb for the fog light position.

How do I change the headlight on a 2018 Jeep Renegade?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D5S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2018 Jeep Renegade?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D5S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2018 Jeep Renegade headlights?

A pair of halogen HID-D5S LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2018 Jeep Renegade?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D5S LED position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

This vehicle is part of the 2017–2018 Jeep Renegade generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 2018 Jeep Renegade

What Size Bulbs Does a 2018 Jeep Renegade Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Moderate (Dust covers often present)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2018 Jeep Renegade Have?

The 2018 Jeep Renegade utilizes a refined lighting configuration featuring 13 distinct bulb positions. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate HID-D5S LED low beam and H13 LED high beam bulbs for precise light distribution. This model belongs to the late years of the Renegade's 2015-2019 production span. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2018 Jeep Renegade?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the HID-D5S LED low beams, as they see the most use. Adding a matching H13 LED LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H11 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2018 Jeep Renegade Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D5S LED	Buy HID-D5S LED →
High Beam	H13 LED	Buy H13 LED →
Fog Light	H11 LED	Buy H11 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	2827 LED	Buy 2827 LED →
Turn Signal Front	12496 LED	Buy 12496 LED →
Turn Signal Rear	7506 LED	Buy 7506 LED →
Reverse Light	921	Buy 921 →
Dome Light	6418	Buy 6418 →
License Plate	2825	Buy 2825 →
Map Light	2825	Buy 2825 →
Parking Light	7528	Buy 7528 →
Trunk Light	2825	Buy 2825 →