What is the low beam headlight bulb size for a 1982 Jeep J-10/J-20 Series?

The 1982 Jeep J-10/J-20 Series uses a H6054 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1982 Jeep J-10/J-20 Series?

The high beam bulb size for the 1982 Jeep J-10/J-20 Series is 194.

Why are my 1982 Jeep J-10/J-20 Series headlights dim?

Dim headlights on a 1982 Jeep J-10/J-20 Series can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6054 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1982 Jeep J-10/J-20 Series fog light?

The 1982 Jeep J-10/J-20 Series typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1982 Jeep J-10/J-20 Series single or dual beam?

The 1982 Jeep J-10/J-20 Series uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1982 Jeep J-10/J-20 Series?

Yes, the 1982 Jeep J-10/J-20 Series comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6054 LED conversion kit for the low beams.

Did the 1982 Jeep J-10/J-20 Series change headlight bulb sizes from the previous year?

Yes — the 1982 Jeep J-10/J-20 Series uses different bulb sizes than the 1981 model. The 1982 generation introduced this bulb configuration.

Is the 1982 Jeep J-10/J-20 Series the first or last year to use H6054 bulbs?

The 1982 Jeep J-10/J-20 Series is the only year in the 1982 generation to use the H6054 bulb for the low beam headlight.

How do I change the headlight on a 1982 Jeep J-10/J-20 Series?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6054 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1982 Jeep J-10/J-20 Series?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6054 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1982 Jeep J-10/J-20 Series headlights?

A pair of halogen H6054 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1982 Jeep J-10/J-20 Series?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6054 position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1982 Jeep J-10/J-20 Series has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1982 Jeep J-10/J-20 Series

What Size Bulbs Does a 1982 Jeep J-10/J-20 Series Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1982 Jeep J-10/J-20 Series Have?

When it comes to nighttime visibility, the 1982 Jeep J-10/J-20 Series relies on an arrangement of 9 specialized bulbs. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate H6054 low beam and 194 high beam bulbs for precise light distribution. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1982 Jeep J-10/J-20 Series?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H6054 low beams, as they see the most use. Adding a matching 194 LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1982 Jeep J-10/J-20 Series Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6054	Buy H6054 →
Turn Signal Front	1157	Buy 1157 →
Side Marker	194	Buy 194 →
Brake Light	1157	Buy 1157 →
Parking Light	1157	Buy 1157 →
Turn Signal Rear	1157	Buy 1157 →
Tail Light	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
High Beam	194	Buy 194 →

How do the 1982 Jeep J-10/J-20 Series's bulbs compare to other years?

The 1982 Jeep J-10/J-20 Series changed bulb sizes from 1981. The previous model year used a different configuration.

The 1983 model switched to a different bulb configuration.

This bulb configuration covers the 1982 model years. ← 1981 1983 →

Finding the best installation guide...

Other J-10/J-20 Series Years

1988 1987 1986 1985 1984 1983 1981 1980 1979 1978 1977 1976 1975 1974

Other Vehicles That Use H6054 Bulbs

2020 Chevrolet Express 2500 2020 Chevrolet Express 3500 2016 Ford E350 2015 Ford E-450 Super Duty 2011 Ford E150-E350 2010 Ford F-350 Super Duty