What is the low beam headlight bulb size for a 1993 Jeep Grand Wagoneer?

The 1993 Jeep Grand Wagoneer uses a 9004 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1993 Jeep Grand Wagoneer?

The high beam bulb size for the 1993 Jeep Grand Wagoneer is N/A.

Why are my 1993 Jeep Grand Wagoneer headlights dim?

Dim headlights on a 1993 Jeep Grand Wagoneer can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1993 Jeep Grand Wagoneer fog light?

The 1993 Jeep Grand Wagoneer typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1993 Jeep Grand Wagoneer single or dual beam?

The 1993 Jeep Grand Wagoneer uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1993 Jeep Grand Wagoneer?

Yes, the 1993 Jeep Grand Wagoneer comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED conversion kit for the low beams.

Did the 1993 Jeep Grand Wagoneer change headlight bulb sizes from the previous year?

Yes — the 1993 Jeep Grand Wagoneer uses different bulb sizes than the 1991 model. The 1993 generation introduced this bulb configuration.

Is the 1993 Jeep Grand Wagoneer the first or last year to use 9004 bulbs?

The 1993 Jeep Grand Wagoneer is the only year in the 1993 generation to use the 9004 bulb for the low beam headlight.

How do I change the headlight on a 1993 Jeep Grand Wagoneer?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1993 Jeep Grand Wagoneer?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1993 Jeep Grand Wagoneer headlights?

A pair of halogen 9004 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1993 Jeep Grand Wagoneer?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1993 Jeep Grand Wagoneer has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1993 Jeep Grand Wagoneer

What Size Bulbs Does a 1993 Jeep Grand Wagoneer Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1993 Jeep Grand Wagoneer Have?

Lighting on the 1993 Jeep Grand Wagoneer is managed by a total of 6 bulbs, covering everything from primary headlights to signal indicators. It features a standard lighting system powered by a dual-bulb halogen configuration using separate 9004 low beam and high beam bulbs for precise light distribution. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1993 Jeep Grand Wagoneer?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9004 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1993 Jeep Grand Wagoneer Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9004	Buy 9004 →
License Plate	168	Buy 168 →
Brake Light	921	Buy 921 →
Side Marker	194	Buy 194 →
Reverse Light	1156	Buy 1156 →
Turn Signal Rear	1156	Buy 1156 →

How do the 1993 Jeep Grand Wagoneer's bulbs compare to other years?

The 1993 Jeep Grand Wagoneer changed bulb sizes from 1991. The previous model year used a different configuration.

This bulb configuration covers the 1993 model years. ← 1991

Finding the best installation guide...

Other Grand Wagoneer Years

1991 1990 1989 1988 1987 1986 1985 1984

Other Vehicles That Use 9004 Bulbs

2005 Pontiac Montana 2004 Oldsmobile Silhouette 2003 Dodge Ram Van 2003 Dodge Wagon 2002 Mercedes-Benz SL-class 2002 Mercedes-Benz SL500