What is the low beam headlight bulb size for a 2020 Jeep Cherokee?

The 2020 Jeep Cherokee uses a N/A bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2020 Jeep Cherokee?

The high beam bulb size for the 2020 Jeep Cherokee is N/A.

Why are my 2020 Jeep Cherokee headlights dim?

Dim headlights on a 2020 Jeep Cherokee can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a N/A LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2020 Jeep Cherokee fog light?

The 2020 Jeep Cherokee typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2020 Jeep Cherokee single or dual beam?

The 2020 Jeep Cherokee uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2020 Jeep Cherokee?

Yes, the 2020 Jeep Cherokee comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a N/A LED conversion kit for the low beams.

Did the 2020 Jeep Cherokee change headlight bulb sizes from the previous year?

Yes — the 2020 Jeep Cherokee uses different bulb sizes than the 2019 model. The 2020 generation introduced this bulb configuration.

Is the 2020 Jeep Cherokee the first or last year to use N/A bulbs?

The 2020 Jeep Cherokee is the only year in the 2020 generation to use the N/A bulb for the low beam headlight.

How do I change the headlight on a 2020 Jeep Cherokee?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old N/A bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2020 Jeep Cherokee?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved N/A LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2020 Jeep Cherokee headlights?

A pair of halogen N/A bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2020 Jeep Cherokee?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the N/A position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2020 Jeep Cherokee has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2020 Jeep Cherokee

What Size Bulbs Does a 2020 Jeep Cherokee Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Moderate (Dust covers often present)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2020 Jeep Cherokee Have?

The 2020 Jeep Cherokee utilizes a refined lighting configuration featuring 1 distinct bulb positions. It features a standard lighting system powered by a dual-bulb halogen configuration using separate low beam and high beam bulbs for precise light distribution. This model belongs to the late years of the Cherokee's 1975-2021 production span. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2020 Jeep Cherokee?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

2020 Jeep Cherokee Bulb Size Chart

Position	Bulb Size	Shop
Reverse Light	7440	Buy 7440 →

How do the 2020 Jeep Cherokee's bulbs compare to other years?

The 2020 Jeep Cherokee changed bulb sizes from 2019. The previous model year used a different configuration.

The 2021 model switched to a different bulb configuration.

This bulb configuration covers the 2020 model years. ← 2019 2021 →

Finding the best installation guide...

Other Cherokee Years

2021 2019 2018 2017 2016 2015 2014 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975