What is the low beam headlight bulb size for a 1988 Honda Prelude?

The 1988 Honda Prelude uses a H6054 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1988 Honda Prelude?

The high beam bulb size for the 1988 Honda Prelude is H6054 LED.

Why are my 1988 Honda Prelude headlights dim?

Dim headlights on a 1988 Honda Prelude can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6054 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1988 Honda Prelude fog light?

The 1988 Honda Prelude typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1988 Honda Prelude single or dual beam?

The 1988 Honda Prelude uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1988 Honda Prelude?

Yes, the 1988 Honda Prelude comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6054 LED LED conversion kit for the low beams.

How do I change the headlight on a 1988 Honda Prelude?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6054 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1988 Honda Prelude?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6054 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1988 Honda Prelude headlights?

A pair of halogen H6054 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1988 Honda Prelude?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6054 LED position are available as direct plug-and-play replacements.

This vehicle is part of the 1983–1991 Honda Prelude generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 1988 Honda Prelude

What Size Bulbs Does a 1988 Honda Prelude Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1988 Honda Prelude Have?

When it comes to nighttime visibility, the 1988 Honda Prelude relies on an arrangement of 2 specialized bulbs. It features a standard lighting system powered by a halogen-based setup where a single H6054 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Prelude's 1979-2001 production span.

Can You Put LED Bulbs in a 1988 Honda Prelude?

Upgrading to LED is one of the most effective ways to modernize your Honda's appearance and safety profile. Since your Prelude uses a single H6054 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb.