What is the low beam headlight bulb size for a 1997 Ford Crown Victoria?

The 1997 Ford Crown Victoria uses a 9006 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1997 Ford Crown Victoria?

The high beam bulb size for the 1997 Ford Crown Victoria is 194.

Why are my 1997 Ford Crown Victoria headlights dim?

Dim headlights on a 1997 Ford Crown Victoria can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1997 Ford Crown Victoria fog light?

The 1997 Ford Crown Victoria uses a LED Fog Light bulb for the fog light position.

Is the 1997 Ford Crown Victoria single or dual beam?

The 1997 Ford Crown Victoria uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1997 Ford Crown Victoria?

Yes, the 1997 Ford Crown Victoria comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED LED conversion kit for the low beams.

Does the 1997 Ford Crown Victoria have fog lights?

Yes, the 1997 Ford Crown Victoria takes a LED Fog Light bulb for the fog light position.

Did the 1997 Ford Crown Victoria change headlight bulb sizes from the previous year?

Yes — the 1997 Ford Crown Victoria uses different bulb sizes than the 1996 model. The 1997 generation introduced this bulb configuration.

Is the 1997 Ford Crown Victoria the first or last year to use 9006 LED bulbs?

The 1997 Ford Crown Victoria is the only year in the 1997 generation to use the 9006 LED bulb for the low beam headlight.

How do I change the headlight on a 1997 Ford Crown Victoria?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1997 Ford Crown Victoria?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1997 Ford Crown Victoria headlights?

A pair of halogen 9006 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1997 Ford Crown Victoria?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 LED position are available as direct plug-and-play replacements.

The 1997 Ford Crown Victoria has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1997 Ford Crown Victoria

What Size Bulbs Does a 1997 Ford Crown Victoria Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1997 Ford Crown Victoria Have?

Owners of the 1997 Ford Crown Victoria will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 LED low beam and 194 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 1997 Ford Crown Victoria?

For a Ford built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9006 LED low beams, as they see the most use. Adding a matching 194 LED kit later will complete the look and ensure consistent lighting performance. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1997 Ford Crown Victoria Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006 LED	Buy 9006 LED →
High Beam	194	Buy 194 →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	194	Buy 194 →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	3457NA LED	Buy 3457NA LED →
Turn Signal Rear	3157K LED	Buy 3157K LED →
Reverse Light	921	Buy 921 →
Dome Light	906	Buy 906 →
License Plate	168	Buy 168 →
Map Light	168	Buy 168 →
Parking Light	3457NA	Buy 3457NA →
Trunk Light	211-2	Buy 211-2 →
Tail Light	3157CK	Buy 3157CK →

How do the 1997 Ford Crown Victoria's bulbs compare to other years?

The 1997 Ford Crown Victoria changed bulb sizes from 1996. The previous model year used a different configuration.

The 1998 model switched to a different bulb configuration.

This bulb configuration covers the 1997 model years. ← 1996 1998 →

Finding the best installation guide...

Other Crown Victoria Years

2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987

Other Vehicles That Use 9006 LED Bulbs

2020 Dodge Journey 2019 GMC Savana 2500 HD 2019 GMC Savana 3500 HD 2018 Chevrolet Express 2500 2015 Honda Civic 2015 Nissan Armada