What is the low beam headlight bulb size for a 1992 Dodge Stealth?

The 1992 Dodge Stealth uses a H4666 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1992 Dodge Stealth?

The high beam bulb size for the 1992 Dodge Stealth is 194.

Why are my 1992 Dodge Stealth headlights dim?

Dim headlights on a 1992 Dodge Stealth can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4666 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1992 Dodge Stealth fog light?

The 1992 Dodge Stealth uses a LED Fog Light bulb for the fog light position.

Is the 1992 Dodge Stealth single or dual beam?

The 1992 Dodge Stealth uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1992 Dodge Stealth?

Yes, the 1992 Dodge Stealth comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4666 LED LED conversion kit for the low beams.

Does the 1992 Dodge Stealth have fog lights?

Yes, the 1992 Dodge Stealth takes a LED Fog Light bulb for the fog light position.

How do I change the headlight on a 1992 Dodge Stealth?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4666 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1992 Dodge Stealth?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4666 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1992 Dodge Stealth headlights?

A pair of halogen H4666 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1992 Dodge Stealth?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4666 LED position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 1992 Dodge Stealth

What Size Bulbs Does a 1992 Dodge Stealth Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1992 Dodge Stealth Have?

Owners of the 1992 Dodge Stealth will find a total of 13 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H4666 LED low beam and 194 high beam bulbs for precise light distribution. This model belongs to the early years of the Stealth's 1992-1996 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1992 Dodge Stealth?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the H4666 LED low beams, as they see the most use. Adding a matching 194 LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1992 Dodge Stealth Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H4666 LED	Buy H4666 LED →
High Beam	194	Buy 194 →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	194	Buy 194 →
Side Marker	3496 LED	Buy 3496 LED →
Turn Signal Front	3496 LED	Buy 3496 LED →
Turn Signal Rear	2057 LED	Buy 2057 LED →
Reverse Light	1156	Buy 1156 →
Dome Light	211-2	Buy 211-2 →
License Plate	168	Buy 168 →
Map Light	168	Buy 168 →
Parking Light	3496	Buy 3496 →
Trunk Light	912	Buy 912 →