What is the low beam headlight bulb size for a 1984 Dodge Rampage?

The 1984 Dodge Rampage uses a H4656 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1984 Dodge Rampage?

The high beam bulb size for the 1984 Dodge Rampage is H4651.

Why are my 1984 Dodge Rampage headlights dim?

Dim headlights on a 1984 Dodge Rampage can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4656 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1984 Dodge Rampage fog light?

The 1984 Dodge Rampage typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1984 Dodge Rampage single or dual beam?

The 1984 Dodge Rampage uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1984 Dodge Rampage?

Yes, the 1984 Dodge Rampage comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4656 LED conversion kit for the low beams.

Did the 1984 Dodge Rampage change headlight bulb sizes from the previous year?

Yes — the 1984 Dodge Rampage uses different bulb sizes than the 1983 model. The 1984 generation introduced this bulb configuration.

Is the 1984 Dodge Rampage the first or last year to use H4656 bulbs?

The 1984 Dodge Rampage is the only year in the 1984 generation to use the H4656 bulb for the low beam headlight.

How do I change the headlight on a 1984 Dodge Rampage?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4656 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1984 Dodge Rampage?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4656 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1984 Dodge Rampage headlights?

A pair of halogen H4656 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1984 Dodge Rampage?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4656 position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1984 Dodge Rampage has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1984 Dodge Rampage

What Size Bulbs Does a 1984 Dodge Rampage Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1984 Dodge Rampage Have?

Lighting on the 1984 Dodge Rampage is managed by a total of 11 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H4656 low beam and H4651 high beam bulbs for precise light distribution. This model belongs to the late years of the Rampage's 1982-1984 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1984 Dodge Rampage?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the H4656 low beams, as they see the most use. Adding a matching H4651 LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1984 Dodge Rampage Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	168	Buy 168 →
High Beam	H4651	Buy H4651 →
Low Beam	H4656	Buy H4656 →
Turn Signal Front	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
License Plate	168	Buy 168 →
Brake Light	1157	Buy 1157 →
Parking Light	1157	Buy 1157 →
Turn Signal Rear	1157	Buy 1157 →
Tail Light	1157	Buy 1157 →
Map Light	912	Buy 912 →

How do the 1984 Dodge Rampage's bulbs compare to other years?

The 1984 Dodge Rampage changed bulb sizes from 1983. The previous model year used a different configuration.

This bulb configuration covers the 1984 model years. ← 1983

Finding the best installation guide...

Other Rampage Years

1983 1982

Other Vehicles That Use H4656 Bulbs

1992 Chevrolet Camaro 1992 Chrysler New Yorker 1991 Chevrolet G10 1991 Chevrolet Van 1991 Chrysler LeBaron 1991 Ford Country Squire