What is the low beam headlight bulb size for a 1985 Dodge Daytona?

The 1985 Dodge Daytona uses a H4656 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1985 Dodge Daytona?

The high beam bulb size for the 1985 Dodge Daytona is H4651.

Why are my 1985 Dodge Daytona headlights dim?

Dim headlights on a 1985 Dodge Daytona can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4656 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1985 Dodge Daytona fog light?

The 1985 Dodge Daytona typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1985 Dodge Daytona single or dual beam?

The 1985 Dodge Daytona uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1985 Dodge Daytona?

Yes, the 1985 Dodge Daytona comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4656 LED conversion kit for the low beams.

Did the 1985 Dodge Daytona change headlight bulb sizes from the previous year?

No — the 1985 Dodge Daytona uses the same bulb sizes as the 1984 model. This configuration has been consistent across the 1984–1985 generation.

Is the 1985 Dodge Daytona the first or last year to use H4656 bulbs?

The 1985 Dodge Daytona is the last year in the 1984–1985 generation to use the H4656 bulb for the low beam headlight.

How do I change the headlight on a 1985 Dodge Daytona?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4656 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1985 Dodge Daytona?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4656 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1985 Dodge Daytona headlights?

A pair of halogen H4656 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1985 Dodge Daytona?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4656 position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1985 Dodge Daytona is the last model year to use this bulb configuration (1984–1985).

Fitment Guaranteed for 1985 Dodge Daytona

What Size Bulbs Does a 1985 Dodge Daytona Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1985 Dodge Daytona Have?

The 1985 Dodge Daytona utilizes a refined lighting configuration featuring 6 distinct bulb positions. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H4656 low beam and H4651 high beam bulbs for precise light distribution. This model belongs to the early years of the Daytona's 1984-1993 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1985 Dodge Daytona?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the H4656 low beams, as they see the most use. Adding a matching H4651 LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1985 Dodge Daytona Bulb Size Chart

Position	Bulb Size	Shop
High Beam	H4651	Buy H4651 →
Low Beam	H4656	Buy H4656 →
Side Marker	168	Buy 168 →
License Plate	168	Buy 168 →
Reverse Light	1156	Buy 1156 →
Map Light	912	Buy 912 →

How do the 1985 Dodge Daytona's bulbs compare to other years?

The 1985 Dodge Daytona uses the same bulbs as the 1984 model.

The 1986 model switched to a different bulb configuration.

This bulb configuration covers the 1984–1985 model years. ← 1984 1986 →

Finding the best installation guide...

Other Daytona Years

1993 1991 1990 1989 1988 1987 1986 1984

Other Vehicles That Use H4656 Bulbs

1992 Chevrolet Camaro 1992 Chrysler New Yorker 1991 Chevrolet G10 1991 Chevrolet Van 1991 Chrysler LeBaron 1991 Ford Country Squire