What is the low beam headlight bulb size for a 1975 Dodge Dart?

The 1975 Dodge Dart uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1975 Dodge Dart?

The high beam bulb size for the 1975 Dodge Dart is N/A.

Why are my 1975 Dodge Dart headlights dim?

Dim headlights on a 1975 Dodge Dart can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1975 Dodge Dart fog light?

The 1975 Dodge Dart typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1975 Dodge Dart single or dual beam?

The 1975 Dodge Dart uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1975 Dodge Dart?

Yes, the 1975 Dodge Dart comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1975 Dodge Dart change headlight bulb sizes from the previous year?

Yes — the 1975 Dodge Dart uses different bulb sizes than the 1974 model. The 1975 generation introduced this bulb configuration.

Is the 1975 Dodge Dart the first or last year to use H6024 bulbs?

The 1975 Dodge Dart is the only year in the 1975 generation to use the H6024 bulb for the low beam headlight.

How do I change the headlight on a 1975 Dodge Dart?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1975 Dodge Dart?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1975 Dodge Dart headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1975 Dodge Dart?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1975 Dodge Dart has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1975 Dodge Dart

What Size Bulbs Does a 1975 Dodge Dart Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1975 Dodge Dart Have?

The 1975 Dodge Dart utilizes a refined lighting configuration featuring 9 distinct bulb positions. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and high beam bulbs for precise light distribution. This model belongs to the mid years of the Dart's 1960-2016 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1975 Dodge Dart?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1975 Dodge Dart Bulb Size Chart

Position	Bulb Size	Shop
Turn Signal Front	1157	Buy 1157 →
Low Beam	H6024	Buy H6024 →
Side Marker	168	Buy 168 →
License Plate	168	Buy 168 →
Parking Light	1157	Buy 1157 →
Brake Light	1157	Buy 1157 →
Turn Signal Rear	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
Tail Light	1157	Buy 1157 →

How do the 1975 Dodge Dart's bulbs compare to other years?

The 1975 Dodge Dart changed bulb sizes from 1974. The previous model year used a different configuration.

The 1976 model switched to a different bulb configuration.

This bulb configuration covers the 1975 model years. ← 1974 1976 →

Finding the best installation guide...

Other Dart Years

2016 2015 2014 2013 1976 1974 1973 1972 1971 1970 1968 1967 1966 1965 1964 1963 1962 1961 1960

Other Vehicles That Use H6024 Bulbs

2006 Hummer H1 1998 Bentley Turbo R 1997 Mazda Miata 1996 Mazda MX-5 Miata 1995 Land Rover Range Rover 1991 Mitsubishi Montero