What is the low beam headlight bulb size for a 1988 Dodge Dakota?

The 1988 Dodge Dakota uses a N/A bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1988 Dodge Dakota?

The high beam bulb size for the 1988 Dodge Dakota is N/A.

Why are my 1988 Dodge Dakota headlights dim?

Dim headlights on a 1988 Dodge Dakota can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a N/A LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1988 Dodge Dakota fog light?

The 1988 Dodge Dakota typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1988 Dodge Dakota single or dual beam?

The 1988 Dodge Dakota uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1988 Dodge Dakota?

Yes, the 1988 Dodge Dakota comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a N/A LED conversion kit for the low beams.

Did the 1988 Dodge Dakota change headlight bulb sizes from the previous year?

No — the 1988 Dodge Dakota uses the same bulb sizes as the 1987 model. This configuration has been consistent across the 1987–1988 generation.

Is the 1988 Dodge Dakota the first or last year to use N/A bulbs?

The 1988 Dodge Dakota is the last year in the 1987–1988 generation to use the N/A bulb for the low beam headlight.

How do I change the headlight on a 1988 Dodge Dakota?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old N/A bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1988 Dodge Dakota?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved N/A LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1988 Dodge Dakota headlights?

A pair of halogen N/A bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1988 Dodge Dakota?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the N/A position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1988 Dodge Dakota is the last model year to use this bulb configuration (1987–1988).

Fitment Guaranteed for 1988 Dodge Dakota

What Size Bulbs Does a 1988 Dodge Dakota Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1988 Dodge Dakota Have?

When it comes to nighttime visibility, the 1988 Dodge Dakota relies on an arrangement of 4 specialized bulbs. It features a standard lighting system powered by a dual-bulb halogen configuration using separate low beam and high beam bulbs for precise light distribution. This model belongs to the early years of the Dakota's 1987-2010 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1988 Dodge Dakota?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1988 Dodge Dakota Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	194	Buy 194 →
Reverse Light	1156	Buy 1156 →
License Plate	168	Buy 168 →
Map Light	912	Buy 912 →

How do the 1988 Dodge Dakota's bulbs compare to other years?

The 1988 Dodge Dakota uses the same bulbs as the 1987 model.

The 1989 model switched to a different bulb configuration.

This bulb configuration covers the 1987–1988 model years. ← 1987 1989 →

Finding the best installation guide...

Other Dakota Years

2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1987