What is the low beam headlight bulb size for a 1993 Dodge Colt?

The 1993 Dodge Colt uses a 9004 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1993 Dodge Colt?

The high beam bulb size for the 1993 Dodge Colt is 9004 LED.

Why are my 1993 Dodge Colt headlights dim?

Dim headlights on a 1993 Dodge Colt can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1993 Dodge Colt fog light?

The 1993 Dodge Colt uses a LED Fog Light bulb for the fog light position.

Is the 1993 Dodge Colt single or dual beam?

The 1993 Dodge Colt uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1993 Dodge Colt?

Yes, the 1993 Dodge Colt comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED LED conversion kit for the low beams.

Does the 1993 Dodge Colt have fog lights?

Yes, the 1993 Dodge Colt takes a LED Fog Light bulb for the fog light position.

How do I change the headlight on a 1993 Dodge Colt?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1993 Dodge Colt?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1993 Dodge Colt headlights?

A pair of halogen 9004 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1993 Dodge Colt?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 LED position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 1993 Dodge Colt

What Size Bulbs Does a 1993 Dodge Colt Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1993 Dodge Colt Have?

When it comes to nighttime visibility, the 1993 Dodge Colt relies on an arrangement of 11 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single 9004 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the Colt's 1993-1995 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1993 Dodge Colt?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. Since your Colt uses a single 9004 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1993 Dodge Colt Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9004 LED	Buy 9004 LED →
High Beam	9004 LED	Buy 9004 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	921 LED	Buy 921 LED →
Side Marker	168 LED	Buy 168 LED →
Turn Signal Front	1157 LED	Buy 1157 LED →
Turn Signal Rear	1156 LED	Buy 1156 LED →
Reverse Light	1156	Buy 1156 →
License Plate	168	Buy 168 →
Parking Light	1157	Buy 1157 →
Trunk Light	LED Light	Buy LED Light →