What is the low beam headlight bulb size for a 2006 Dodge Charger?

The 2006 Dodge Charger uses a 9006XS LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2006 Dodge Charger?

The high beam bulb size for the 2006 Dodge Charger is 9005XS LED.

Why are my 2006 Dodge Charger headlights dim?

Dim headlights on a 2006 Dodge Charger can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006XS LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2006 Dodge Charger fog light?

The 2006 Dodge Charger uses a 9145 LED bulb for the fog light position.

Is the 2006 Dodge Charger single or dual beam?

The 2006 Dodge Charger uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2006 Dodge Charger?

Yes, the 2006 Dodge Charger comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006XS LED LED conversion kit for the low beams.

Does the 2006 Dodge Charger have fog lights?

Yes, the 2006 Dodge Charger takes a 9145 LED bulb for the fog light position.

How do I change the headlight on a 2006 Dodge Charger?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006XS LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2006 Dodge Charger?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006XS LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2006 Dodge Charger headlights?

A pair of halogen 9006XS LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2006 Dodge Charger?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006XS LED position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 2006 Dodge Charger

What Size Bulbs Does a 2006 Dodge Charger Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2006 Dodge Charger Have?

When it comes to nighttime visibility, the 2006 Dodge Charger relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006XS LED low beam and 9005XS LED high beam bulbs for precise light distribution. This model belongs to the mid years of the Charger's 1968-2022 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2006 Dodge Charger?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the 9006XS LED low beams, as they see the most use. Adding a matching 9005XS LED LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 9145 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2006 Dodge Charger Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006XS LED	Buy 9006XS LED →
High Beam	9005XS LED	Buy 9005XS LED →
Fog Light	9145 LED	Buy 9145 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	168 LED	Buy 168 LED →
Turn Signal Front	3157AK LED	Buy 3157AK LED →
Turn Signal Rear	3057K LED	Buy 3057K LED →
Reverse Light	921	Buy 921 →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	578	Buy 578 →
Parking Light	3157AK	Buy 3157AK →
Trunk Light	562	Buy 562 →