What is the low beam headlight bulb size for a 1968 Dodge Charger?

The 1968 Dodge Charger uses a 4000 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1968 Dodge Charger?

The high beam bulb size for the 1968 Dodge Charger is H5001 LED.

Why are my 1968 Dodge Charger headlights dim?

Dim headlights on a 1968 Dodge Charger can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 4000 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1968 Dodge Charger fog light?

The 1968 Dodge Charger uses a LED Fog Light bulb for the fog light position.

Is the 1968 Dodge Charger single or dual beam?

The 1968 Dodge Charger uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1968 Dodge Charger?

Yes, the 1968 Dodge Charger comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 4000 LED LED conversion kit for the low beams.

Does the 1968 Dodge Charger have fog lights?

Yes, the 1968 Dodge Charger takes a LED Fog Light bulb for the fog light position.

How do I change the headlight on a 1968 Dodge Charger?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 4000 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Dodge vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1968 Dodge Charger?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 4000 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1968 Dodge Charger headlights?

A pair of halogen 4000 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1968 Dodge Charger?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 4000 LED position are available as direct plug-and-play replacements. Since the Dodge uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 1968 Dodge Charger

What Size Bulbs Does a 1968 Dodge Charger Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1968 Dodge Charger Have?

Owners of the 1968 Dodge Charger will find a total of 13 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 4000 LED low beam and H5001 LED high beam bulbs for precise light distribution. This model belongs to the early years of the Charger's 1968-2022 production span. Note that Dodge vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1968 Dodge Charger?

Upgrading to LED is one of the most effective ways to modernize your Dodge's appearance and safety profile. We recommend starting your upgrade with the 4000 LED low beams, as they see the most use. Adding a matching H5001 LED LED kit later will complete the look and ensure consistent lighting performance. Because Dodge utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1968 Dodge Charger Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	4000 LED	Buy 4000 LED →
High Beam	H5001 LED	Buy H5001 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	57	Buy 57 →
Side Marker	1895 LED	Buy 1895 LED →
Turn Signal Front	1034 LED	Buy 1034 LED →
Turn Signal Rear	1034 LED	Buy 1034 LED →
Reverse Light	1073	Buy 1073 →
Dome Light	1004	Buy 1004 →
License Plate	67	Buy 67 →
Map Light	90	Buy 90 →
Parking Light	1034	Buy 1034 →
Trunk Light	1004	Buy 1004 →