What is the low beam headlight bulb size for a 2001 Chrysler Intrepid?

The 2001 Chrysler Intrepid uses a 9006XS bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2001 Chrysler Intrepid?

The high beam bulb size for the 2001 Chrysler Intrepid is 9005XS.

Why are my 2001 Chrysler Intrepid headlights dim?

Dim headlights on a 2001 Chrysler Intrepid can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006XS LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2001 Chrysler Intrepid fog light?

The 2001 Chrysler Intrepid typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2001 Chrysler Intrepid single or dual beam?

The 2001 Chrysler Intrepid uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2001 Chrysler Intrepid?

Yes, the 2001 Chrysler Intrepid comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006XS LED conversion kit for the low beams.

Did the 2001 Chrysler Intrepid change headlight bulb sizes from the previous year?

Yes — the 2001 Chrysler Intrepid uses different bulb sizes than the 2000 model. The 2001 generation introduced this bulb configuration.

Is the 2001 Chrysler Intrepid the first or last year to use 9006XS bulbs?

The 2001 Chrysler Intrepid is the only year in the 2001 generation to use the 9006XS bulb for the low beam headlight.

How do I change the headlight on a 2001 Chrysler Intrepid?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006XS bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2001 Chrysler Intrepid?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006XS LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2001 Chrysler Intrepid headlights?

A pair of halogen 9006XS bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2001 Chrysler Intrepid?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006XS position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2001 Chrysler Intrepid has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2001 Chrysler Intrepid

What Size Bulbs Does a 2001 Chrysler Intrepid Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2001 Chrysler Intrepid Have?

Lighting on the 2001 Chrysler Intrepid is managed by a total of 11 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006XS low beam and 9005XS high beam bulbs for precise light distribution. This model belongs to the mid years of the Intrepid's 1993-2004 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2001 Chrysler Intrepid?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9006XS low beams, as they see the most use. Adding a matching 9005XS LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

2001 Chrysler Intrepid Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	3157NA	Buy 3157NA →
Turn Signal Front	3157NA	Buy 3157NA →
High Beam	9005XS	Buy 9005XS →
Low Beam	9006XS	Buy 9006XS →
Parking Light	3157NA	Buy 3157NA →
License Plate	168	Buy 168 →
Reverse Light	3157CK	Buy 3157CK →
Brake Light	3157CK	Buy 3157CK →
Turn Signal Rear	3157	Buy 3157 →
Tail Light	3157	Buy 3157 →
Trunk Light	906	Buy 906 →

How do the 2001 Chrysler Intrepid's bulbs compare to other years?

The 2001 Chrysler Intrepid changed bulb sizes from 2000. The previous model year used a different configuration.

The 2002 model switched to a different bulb configuration.

This bulb configuration covers the 2001 model years. ← 2000 2002 →

Finding the best installation guide...

Other Intrepid Years

2004 2003 2002 2000 1999 1998 1997 1996 1995 1994 1993

More from Chrysler

200 300 300C 300M Aspen Cirrus Concorde Conquest

Other Vehicles That Use 9006XS Bulbs

2004 Cadillac SRX 1999 Dodge Intrepid