What is the low beam headlight bulb size for a 1995 Chrysler Intrepid?

The 1995 Chrysler Intrepid uses a 9007 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1995 Chrysler Intrepid?

The high beam bulb size for the 1995 Chrysler Intrepid is N/A.

Why are my 1995 Chrysler Intrepid headlights dim?

Dim headlights on a 1995 Chrysler Intrepid can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1995 Chrysler Intrepid fog light?

The 1995 Chrysler Intrepid typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1995 Chrysler Intrepid single or dual beam?

The 1995 Chrysler Intrepid uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1995 Chrysler Intrepid?

Yes, the 1995 Chrysler Intrepid comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED conversion kit for the low beams.

Did the 1995 Chrysler Intrepid change headlight bulb sizes from the previous year?

Yes — the 1995 Chrysler Intrepid uses different bulb sizes than the 1994 model. The 1995 generation introduced this bulb configuration.

Is the 1995 Chrysler Intrepid the first or last year to use 9007 bulbs?

The 1995 Chrysler Intrepid is the only year in the 1995 generation to use the 9007 bulb for the low beam headlight.

How do I change the headlight on a 1995 Chrysler Intrepid?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Chrysler vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1995 Chrysler Intrepid?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1995 Chrysler Intrepid headlights?

A pair of halogen 9007 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1995 Chrysler Intrepid?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 position are available as direct plug-and-play replacements. Since the Chrysler uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1995 Chrysler Intrepid has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1995 Chrysler Intrepid

What Size Bulbs Does a 1995 Chrysler Intrepid Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1995 Chrysler Intrepid Have?

When it comes to nighttime visibility, the 1995 Chrysler Intrepid relies on an arrangement of 9 specialized bulbs. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate 9007 low beam and high beam bulbs for precise light distribution. This model belongs to the early years of the Intrepid's 1993-2004 production span. Note that Chrysler vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1995 Chrysler Intrepid?

Upgrading to LED is one of the most effective ways to modernize your Chrysler's appearance and safety profile. We recommend starting your upgrade with the 9007 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Chrysler utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1995 Chrysler Intrepid Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	3157CK	Buy 3157CK →
Turn Signal Front	3157CK	Buy 3157CK →
Low Beam	9007	Buy 9007 →
Parking Light	3157CK	Buy 3157CK →
Reverse Light	3157	Buy 3157 →
Turn Signal Rear	3157CK	Buy 3157CK →
Tail Light	3157CK	Buy 3157CK →
Brake Light	3057	Buy 3057 →
License Plate	168	Buy 168 →