What is the low beam headlight bulb size for a 1997 Chevrolet S10?

The 1997 Chevrolet S10 uses a 9006 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1997 Chevrolet S10?

The high beam bulb size for the 1997 Chevrolet S10 is PC74.

Why are my 1997 Chevrolet S10 headlights dim?

Dim headlights on a 1997 Chevrolet S10 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1997 Chevrolet S10 fog light?

The 1997 Chevrolet S10 uses a H3 LED bulb for the fog light position.

Is the 1997 Chevrolet S10 single or dual beam?

The 1997 Chevrolet S10 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1997 Chevrolet S10?

Yes, the 1997 Chevrolet S10 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED LED conversion kit for the low beams.

Does the 1997 Chevrolet S10 have fog lights?

Yes, the 1997 Chevrolet S10 takes a H3 LED bulb for the fog light position.

Did the 1997 Chevrolet S10 change headlight bulb sizes from the previous year?

No — the 1997 Chevrolet S10 uses the same bulb sizes as the 1996 model. This configuration has been consistent across the 1996–1997 generation.

Is the 1997 Chevrolet S10 the first or last year to use 9006 LED bulbs?

The 1997 Chevrolet S10 is the last year in the 1996–1997 generation to use the 9006 LED bulb for the low beam headlight.

How do I change the headlight on a 1997 Chevrolet S10?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1997 Chevrolet S10?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1997 Chevrolet S10 headlights?

A pair of halogen 9006 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1997 Chevrolet S10?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 LED position are available as direct plug-and-play replacements.

The 1997 Chevrolet S10 is the last model year to use this bulb configuration (1996–1997).

Fitment Guaranteed for 1997 Chevrolet S10

What Size Bulbs Does a 1997 Chevrolet S10 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1997 Chevrolet S10 Have?

Lighting on the 1997 Chevrolet S10 is managed by a total of 12 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 LED low beam and PC74 high beam bulbs for precise light distribution. This model belongs to the mid years of the S10's 1982-2004 production span.

Can You Put LED Bulbs in a 1997 Chevrolet S10?

For a Chevrolet built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9006 LED low beams, as they see the most use. Adding a matching PC74 LED kit later will complete the look and ensure consistent lighting performance. Don't forget the H3 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1997 Chevrolet S10 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006 LED	Buy 9006 LED →
High Beam	PC74	Buy PC74 →
Fog Light	H3 LED	Buy H3 LED →
Brake Light	PC74	Buy PC74 →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	3057 LED	Buy 3057 LED →
Reverse Light	3057	Buy 3057 →
Dome Light	212-2	Buy 212-2 →
License Plate	194	Buy 194 →
Parking Light	3157NA	Buy 3157NA →
Trunk Light	LED Light	Buy LED Light →

How do the 1997 Chevrolet S10's bulbs compare to other years?

The 1997 Chevrolet S10 uses the same bulbs as the 1996 model.

The 1999 model switched to a different bulb configuration.

This bulb configuration covers the 1996–1997 model years. ← 1996 1999 →

Finding the best installation guide...

Other S10 Years

2004 2003 2002 2001 2000 1999 1996 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1983 1982

More from Chevrolet

3A 3B 3C 3D 3E 3F 3G All Light Trucks

Other Vehicles That Use 9006 LED Bulbs

2020 Dodge Journey 2019 GMC Savana 2500 HD 2019 GMC Savana 3500 HD 2015 Honda Civic 2015 Nissan Armada 2015 Nissan Titan