What is the low beam headlight bulb size for a 1989 Chevrolet S10 Blazer?

The 1989 Chevrolet S10 Blazer uses a H6054 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1989 Chevrolet S10 Blazer?

The high beam bulb size for the 1989 Chevrolet S10 Blazer is 194.

Why are my 1989 Chevrolet S10 Blazer headlights dim?

Dim headlights on a 1989 Chevrolet S10 Blazer can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6054 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1989 Chevrolet S10 Blazer fog light?

The 1989 Chevrolet S10 Blazer typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1989 Chevrolet S10 Blazer single or dual beam?

The 1989 Chevrolet S10 Blazer uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1989 Chevrolet S10 Blazer?

Yes, the 1989 Chevrolet S10 Blazer comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6054 LED conversion kit for the low beams.

Did the 1989 Chevrolet S10 Blazer change headlight bulb sizes from the previous year?

Yes — the 1989 Chevrolet S10 Blazer uses different bulb sizes than the 1988 model. The 1989 generation introduced this bulb configuration.

Is the 1989 Chevrolet S10 Blazer the first or last year to use H6054 bulbs?

The 1989 Chevrolet S10 Blazer is the only year in the 1989 generation to use the H6054 bulb for the low beam headlight.

How do I change the headlight on a 1989 Chevrolet S10 Blazer?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6054 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1989 Chevrolet S10 Blazer?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6054 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1989 Chevrolet S10 Blazer headlights?

A pair of halogen H6054 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1989 Chevrolet S10 Blazer?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6054 position are available as direct plug-and-play replacements.

The 1989 Chevrolet S10 Blazer has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1989 Chevrolet S10 Blazer

What Size Bulbs Does a 1989 Chevrolet S10 Blazer Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1989 Chevrolet S10 Blazer Have?

Owners of the 1989 Chevrolet S10 Blazer will find a total of 11 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H6054 low beam and 194 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 1989 Chevrolet S10 Blazer?

For a Chevrolet built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H6054 low beams, as they see the most use. Adding a matching 194 LED kit later will complete the look and ensure consistent lighting performance.

1989 Chevrolet S10 Blazer Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6054	Buy H6054 →
Side Marker	194	Buy 194 →
Turn Signal Front	1157	Buy 1157 →
Parking Light	1157	Buy 1157 →
License Plate	194	Buy 194 →
Turn Signal Rear	1157	Buy 1157 →
Tail Light	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
Brake Light	1157	Buy 1157 →
High Beam	194	Buy 194 →
Map Light	194	Buy 194 →

How do the 1989 Chevrolet S10 Blazer's bulbs compare to other years?

The 1989 Chevrolet S10 Blazer changed bulb sizes from 1988. The previous model year used a different configuration.

The 1990 model switched to a different bulb configuration.

This bulb configuration covers the 1989 model years. ← 1988 1990 →

Finding the best installation guide...

Other S10 Blazer Years

1994 1993 1992 1991 1990 1988 1987 1986 1985 1984 1983

More from Chevrolet

3A 3B 3C 3D 3E 3F 3G All Light Trucks

Other Vehicles That Use H6054 Bulbs

2016 Ford E350 2015 Ford E-450 Super Duty 2011 Ford E150-E350 2010 Ford F-350 Super Duty 2008 Ford F-550 Super Duty 2007 Ford F-450 Super Duty