What is the low beam headlight bulb size for a 2000 Chevrolet S-10 Pickup?

The 2000 Chevrolet S-10 Pickup uses a 9006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2000 Chevrolet S-10 Pickup?

The high beam bulb size for the 2000 Chevrolet S-10 Pickup is 9005.

Why are my 2000 Chevrolet S-10 Pickup headlights dim?

Dim headlights on a 2000 Chevrolet S-10 Pickup can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2000 Chevrolet S-10 Pickup fog light?

The 2000 Chevrolet S-10 Pickup uses a 880 bulb for the fog light position.

Is the 2000 Chevrolet S-10 Pickup single or dual beam?

The 2000 Chevrolet S-10 Pickup uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2000 Chevrolet S-10 Pickup?

Yes, the 2000 Chevrolet S-10 Pickup comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED conversion kit for the low beams.

Does the 2000 Chevrolet S-10 Pickup have fog lights?

Yes, the 2000 Chevrolet S-10 Pickup takes a 880 bulb for the fog light position.

Did the 2000 Chevrolet S-10 Pickup change headlight bulb sizes from the previous year?

No — the 2000 Chevrolet S-10 Pickup uses the same bulb sizes as the 1999 model. This configuration has been consistent across the 1999–2001 generation.

How do I change the headlight on a 2000 Chevrolet S-10 Pickup?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2000 Chevrolet S-10 Pickup?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2000 Chevrolet S-10 Pickup headlights?

A pair of halogen 9006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2000 Chevrolet S-10 Pickup?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 position are available as direct plug-and-play replacements.

The 2000 Chevrolet S-10 Pickup shares its bulb sizes with the 1999–2001 generation.

Fitment Guaranteed for 2000 Chevrolet S-10 Pickup

What Size Bulbs Does a 2000 Chevrolet S-10 Pickup Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2000 Chevrolet S-10 Pickup Have?

When it comes to nighttime visibility, the 2000 Chevrolet S-10 Pickup relies on an arrangement of 12 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 low beam and 9005 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 2000 Chevrolet S-10 Pickup?

For a Chevrolet built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9006 low beams, as they see the most use. Adding a matching 9005 LED kit later will complete the look and ensure consistent lighting performance. Don't forget the 880 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2000 Chevrolet S-10 Pickup Bulb Size Chart

Position	Bulb Size	Shop
Fog Light	880	Buy 880 →
Side Marker	194	Buy 194 →
High Beam	9005	Buy 9005 →
Turn Signal Front	3157NA	Buy 3157NA →
Low Beam	9006	Buy 9006 →
License Plate	168	Buy 168 →
Reverse Light	3057	Buy 3057 →
Brake Light	3057	Buy 3057 →
Turn Signal Rear	3057	Buy 3057 →
Tail Light	3057	Buy 3057 →
Parking Light	3157NA	Buy 3157NA →
Map Light	168	Buy 168 →