What is the low beam headlight bulb size for a 2010 Chevrolet Colorado 2-Door?

The 2010 Chevrolet Colorado 2-Door uses a 9006 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2010 Chevrolet Colorado 2-Door?

The high beam bulb size for the 2010 Chevrolet Colorado 2-Door is 9006 LED.

Why are my 2010 Chevrolet Colorado 2-Door headlights dim?

Dim headlights on a 2010 Chevrolet Colorado 2-Door can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2010 Chevrolet Colorado 2-Door fog light?

The 2010 Chevrolet Colorado 2-Door uses a 9045 LED bulb for the fog light position.

Is the 2010 Chevrolet Colorado 2-Door single or dual beam?

The 2010 Chevrolet Colorado 2-Door uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2010 Chevrolet Colorado 2-Door?

Yes, the 2010 Chevrolet Colorado 2-Door comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED LED conversion kit for the low beams.

Does the 2010 Chevrolet Colorado 2-Door have fog lights?

Yes, the 2010 Chevrolet Colorado 2-Door takes a 9045 LED bulb for the fog light position.

Did the 2010 Chevrolet Colorado 2-Door change headlight bulb sizes from the previous year?

No — the 2010 Chevrolet Colorado 2-Door uses the same bulb sizes as the 2009 model. This configuration has been consistent across the 2009–2011 generation.

How do I change the headlight on a 2010 Chevrolet Colorado 2-Door?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2010 Chevrolet Colorado 2-Door?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2010 Chevrolet Colorado 2-Door headlights?

A pair of halogen 9006 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2010 Chevrolet Colorado 2-Door?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 LED position are available as direct plug-and-play replacements.

The 2010 Chevrolet Colorado 2-Door shares its bulb sizes with the 2009–2011 generation.

Fitment Guaranteed for 2010 Chevrolet Colorado 2-Door

What Size Bulbs Does a 2010 Chevrolet Colorado 2-Door Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2010 Chevrolet Colorado 2-Door Have?

Owners of the 2010 Chevrolet Colorado 2-Door will find a total of 13 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single 9006 LED dual-filament bulb handles both low and high beam duties within the same reflector.

Can You Put LED Bulbs in a 2010 Chevrolet Colorado 2-Door?

For a Chevrolet built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Colorado 2-Door uses a single 9006 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the 9045 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2010 Chevrolet Colorado 2-Door Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006 LED	Buy 9006 LED →
High Beam	9006 LED	Buy 9006 LED →
Fog Light	9045 LED	Buy 9045 LED →
Brake Light	912	Buy 912 →
Dome Light	578	Buy 578 →
Side Marker	3057	Buy 3057 →
Turn Signal Front	3757NA	Buy 3757NA →
License Plate	12961	Buy 12961 →
Map Light	212-2	Buy 212-2 →
Parking Light	3757NA	Buy 3757NA →
Turn Signal Rear	3057	Buy 3057 →
Reverse Light	3057	Buy 3057 →
Trunk Light	912	Buy 912 →

How do the 2010 Chevrolet Colorado 2-Door's bulbs compare to other years?

The 2010 Chevrolet Colorado 2-Door uses the same bulbs as the 2009 model.

The 2011 model continues with the same bulb sizes.

This bulb configuration covers the 2009–2011 model years. ← 2009 2011 →

Finding the best installation guide...

Other Colorado 2-Door Years

2011 2009

More from Chevrolet

3A 3B 3C 3D 3E 3F 3G All Light Trucks

Other Vehicles That Use 9006 LED Bulbs

2020 Dodge Journey 2019 GMC Savana 2500 HD 2019 GMC Savana 3500 HD 2015 Honda Civic 2015 Nissan Armada 2015 Nissan Titan