What is the low beam headlight bulb size for a 1986 Chevrolet Blazer?

The 1986 Chevrolet Blazer uses a H4656 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1986 Chevrolet Blazer?

The high beam bulb size for the 1986 Chevrolet Blazer is H4651.

Why are my 1986 Chevrolet Blazer headlights dim?

Dim headlights on a 1986 Chevrolet Blazer can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4656 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1986 Chevrolet Blazer fog light?

The 1986 Chevrolet Blazer typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1986 Chevrolet Blazer single or dual beam?

The 1986 Chevrolet Blazer uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1986 Chevrolet Blazer?

Yes, the 1986 Chevrolet Blazer comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4656 LED conversion kit for the low beams.

Did the 1986 Chevrolet Blazer change headlight bulb sizes from the previous year?

Yes — the 1986 Chevrolet Blazer uses different bulb sizes than the 1985 model. The 1986 generation introduced this bulb configuration.

Is the 1986 Chevrolet Blazer the first or last year to use H4656 bulbs?

The 1986 Chevrolet Blazer is the only year in the 1986 generation to use the H4656 bulb for the low beam headlight.

How do I change the headlight on a 1986 Chevrolet Blazer?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4656 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1986 Chevrolet Blazer?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4656 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1986 Chevrolet Blazer headlights?

A pair of halogen H4656 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1986 Chevrolet Blazer?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4656 position are available as direct plug-and-play replacements.

The 1986 Chevrolet Blazer has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1986 Chevrolet Blazer

What Size Bulbs Does a 1986 Chevrolet Blazer Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1986 Chevrolet Blazer Have?

The 1986 Chevrolet Blazer utilizes a refined lighting configuration featuring 10 distinct bulb positions. It features a comprehensive lighting system powered by a dual-bulb halogen configuration using separate H4656 low beam and H4651 high beam bulbs for precise light distribution. This model belongs to the mid years of the Blazer's 1969-2020 production span.

Can You Put LED Bulbs in a 1986 Chevrolet Blazer?

For a Chevrolet built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H4656 low beams, as they see the most use. Adding a matching H4651 LED kit later will complete the look and ensure consistent lighting performance.

1986 Chevrolet Blazer Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	194	Buy 194 →
High Beam	H4651	Buy H4651 →
Low Beam	H4656	Buy H4656 →
Turn Signal Front	1157	Buy 1157 →
Parking Light	1157	Buy 1157 →
Turn Signal Rear	1157	Buy 1157 →
Tail Light	1157	Buy 1157 →
Reverse Light	1156	Buy 1156 →
Brake Light	1157	Buy 1157 →
License Plate	194	Buy 194 →

How do the 1986 Chevrolet Blazer's bulbs compare to other years?

The 1986 Chevrolet Blazer changed bulb sizes from 1985. The previous model year used a different configuration.

The 1987 model switched to a different bulb configuration.

This bulb configuration covers the 1986 model years. ← 1985 1987 →

Finding the best installation guide...

Other Blazer Years

2020 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1970 1969

More from Chevrolet

3A 3B 3C 3D 3E 3F 3G All Light Trucks

Other Vehicles That Use H4656 Bulbs

1992 Chrysler New Yorker 1991 Chrysler LeBaron 1991 Ford Country Squire 1991 Ford Crown Victoria 1991 Ford LTD Crown Victoria 1991 GMC G Series Van