What is the low beam headlight bulb size for a 1989 Cadillac Seville?

The 1989 Cadillac Seville uses a 9004 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1989 Cadillac Seville?

The high beam bulb size for the 1989 Cadillac Seville is 9004.

Why are my 1989 Cadillac Seville headlights dim?

Dim headlights on a 1989 Cadillac Seville can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9004 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1989 Cadillac Seville fog light?

The 1989 Cadillac Seville uses a 881 bulb for the fog light position.

Is the 1989 Cadillac Seville single or dual beam?

The 1989 Cadillac Seville uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1989 Cadillac Seville?

Yes, the 1989 Cadillac Seville comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9004 LED conversion kit for the low beams.

Does the 1989 Cadillac Seville have fog lights?

Yes, the 1989 Cadillac Seville takes a 881 bulb for the fog light position.

Did the 1989 Cadillac Seville change headlight bulb sizes from the previous year?

Yes — the 1989 Cadillac Seville uses different bulb sizes than the 1988 model. The 1989 generation introduced this bulb configuration.

Is the 1989 Cadillac Seville the first or last year to use 9004 bulbs?

The 1989 Cadillac Seville is the only year in the 1989 generation to use the 9004 bulb for the low beam headlight.

How do I change the headlight on a 1989 Cadillac Seville?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9004 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1989 Cadillac Seville?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9004 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1989 Cadillac Seville headlights?

A pair of halogen 9004 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1989 Cadillac Seville?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9004 position are available as direct plug-and-play replacements.

The 1989 Cadillac Seville has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1989 Cadillac Seville

What Size Bulbs Does a 1989 Cadillac Seville Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1989 Cadillac Seville Have?

The 1989 Cadillac Seville utilizes a refined lighting configuration featuring 9 distinct bulb positions. It features a comprehensive lighting system powered by a halogen-based setup where a single 9004 dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Seville's 1976-2004 production span.

Can You Put LED Bulbs in a 1989 Cadillac Seville?

Upgrading to LED is one of the most effective ways to modernize your Cadillac's appearance and safety profile. Since your Seville uses a single 9004 bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the 881 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1989 Cadillac Seville Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9004	Buy 9004 →
Fog Light	881	Buy 881 →
High Beam	9004	Buy 9004 →
Reverse Light	1156	Buy 1156 →
Side Marker	194	Buy 194 →
Brake Light	1156	Buy 1156 →
License Plate	194	Buy 194 →
Dome Light	906	Buy 906 →
Map Light	906	Buy 906 →

How do the 1989 Cadillac Seville's bulbs compare to other years?

The 1989 Cadillac Seville changed bulb sizes from 1988. The previous model year used a different configuration.

The 1990 model switched to a different bulb configuration.

This bulb configuration covers the 1989 model years. ← 1988 1990 →

Finding the best installation guide...

Other Seville Years

2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1990 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976

More from Cadillac

60 Special ATS Allante Brougham CT6 CTS CTS Coupe & Wagon CTS Sedan

Other Vehicles That Use 9004 Bulbs

2005 Pontiac Montana 2004 Oldsmobile Silhouette 2003 Dodge Ram Van 2003 Dodge Wagon 2002 Mercedes-Benz SL-class 2002 Mercedes-Benz SL500