What is the low beam headlight bulb size for a 2010 Buick Lucerne?

The 2010 Buick Lucerne uses a 9006 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2010 Buick Lucerne?

The high beam bulb size for the 2010 Buick Lucerne is 9005 LED.

Why are my 2010 Buick Lucerne headlights dim?

Dim headlights on a 2010 Buick Lucerne can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2010 Buick Lucerne fog light?

The 2010 Buick Lucerne uses a H11 LED bulb for the fog light position.

Is the 2010 Buick Lucerne single or dual beam?

The 2010 Buick Lucerne uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2010 Buick Lucerne?

Yes, the 2010 Buick Lucerne comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED LED conversion kit for the low beams.

Does the 2010 Buick Lucerne have fog lights?

Yes, the 2010 Buick Lucerne takes a H11 LED bulb for the fog light position.

Did the 2010 Buick Lucerne change headlight bulb sizes from the previous year?

Yes — the 2010 Buick Lucerne uses different bulb sizes than the 2009 model. The 2010–2011 generation introduced this bulb configuration.

Is the 2010 Buick Lucerne the first or last year to use 9006 LED bulbs?

The 2010 Buick Lucerne is the first year in the 2010–2011 generation to use the 9006 LED bulb for the low beam headlight.

How do I change the headlight on a 2010 Buick Lucerne?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2010 Buick Lucerne?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2010 Buick Lucerne headlights?

A pair of halogen 9006 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2010 Buick Lucerne?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 LED position are available as direct plug-and-play replacements.

The 2010 Buick Lucerne is the first model year to use this bulb configuration (2010–2011).

Fitment Guaranteed for 2010 Buick Lucerne

What Size Bulbs Does a 2010 Buick Lucerne Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2010 Buick Lucerne Have?

When it comes to nighttime visibility, the 2010 Buick Lucerne relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 LED low beam and 9005 LED high beam bulbs for precise light distribution. This model belongs to the late years of the Lucerne's 2006-2011 production span.

Can You Put LED Bulbs in a 2010 Buick Lucerne?

Upgrading to LED is one of the most effective ways to modernize your Buick's appearance and safety profile. We recommend starting your upgrade with the 9006 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Don't forget the H11 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2010 Buick Lucerne Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006 LED	Buy 9006 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	H11 LED	Buy H11 LED →
Brake Light	3157CK	Buy 3157CK →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	5702AK LED	Buy 5702AK LED →
Turn Signal Rear	3057K LED	Buy 3057K LED →
License Plate	194	Buy 194 →
Parking Light	5702AK	Buy 5702AK →
Reverse Light	921	Buy 921 →
Trunk Light	211-2	Buy 211-2 →
Daytime Running	9006	Buy 9006 →
Tail Light	194	Buy 194 →

How do the 2010 Buick Lucerne's bulbs compare to other years?

The 2010 Buick Lucerne changed bulb sizes from 2009. The previous model year used a different configuration.

The 2011 model continues with the same bulb sizes.

This bulb configuration covers the 2010–2011 model years. ← 2009 2011 →

Finding the best installation guide...

Other Lucerne Years

2011 2009 2008 2007 2006

Other Vehicles That Use 9006 LED Bulbs

2020 Dodge Journey 2019 GMC Savana 2500 HD 2019 GMC Savana 3500 HD 2018 Chevrolet Express 2500 2015 Honda Civic 2015 Nissan Armada