What is the low beam headlight bulb size for a 2013 BMW X5?

The 2013 BMW X5 uses a H7 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 BMW X5?

The high beam bulb size for the 2013 BMW X5 is H1.

Why are my 2013 BMW X5 headlights dim?

Dim headlights on a 2013 BMW X5 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H7 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 BMW X5 fog light?

The 2013 BMW X5 uses a H11 bulb for the fog light position.

Is the 2013 BMW X5 single or dual beam?

The 2013 BMW X5 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2013 BMW X5?

Yes, the 2013 BMW X5 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H7 LED conversion kit for the low beams.

Does the 2013 BMW X5 have fog lights?

Yes, the 2013 BMW X5 takes a H11 bulb for the fog light position.

Did the 2013 BMW X5 change headlight bulb sizes from the previous year?

No — the 2013 BMW X5 uses the same bulb sizes as the 2012 model. This configuration has been consistent across the 2012–2013 generation.

Is the 2013 BMW X5 the first or last year to use H7 bulbs?

The 2013 BMW X5 is the last year in the 2012–2013 generation to use the H7 bulb for the low beam headlight.

How do I change the headlight on a 2013 BMW X5?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H7 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 BMW X5?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H7 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 BMW X5 headlights?

A pair of halogen H7 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 BMW X5?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H7 position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2013 BMW X5 is the last model year to use this bulb configuration (2012–2013).

Fitment Guaranteed for 2013 BMW X5

What Size Bulbs Does a 2013 BMW X5 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2013 BMW X5 Have?

When it comes to nighttime visibility, the 2013 BMW X5 relies on an arrangement of 7 specialized bulbs. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H7 low beam and H1 high beam bulbs for precise light distribution. This model belongs to the mid years of the X5's 2000-2019 production span. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2013 BMW X5?

Upgrading to LED is one of the most effective ways to modernize your BMW's appearance and safety profile. We recommend starting your upgrade with the H7 low beams, as they see the most use. Adding a matching H1 LED kit later will complete the look and ensure consistent lighting performance. Because BMW utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H11 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2013 BMW X5 Bulb Size Chart

Position	Bulb Size	Shop
Fog Light	H11	Buy H11 →
High Beam	H1	Buy H1 →
Low Beam	H7	Buy H7 →
Daytime Running	H8	Buy H8 →
Brake Light	921	Buy 921 →
Reverse Light	921	Buy 921 →
Door Light	W5W	Buy W5W →

How do the 2013 BMW X5's bulbs compare to other years?

The 2013 BMW X5 uses the same bulbs as the 2012 model.

The 2014 model switched to a different bulb configuration.

This bulb configuration covers the 2012–2013 model years. ← 2012 2014 →

Finding the best installation guide...

Other X5 Years

2019 2018 2017 2016 2014 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000

Other Vehicles That Use H7 Bulbs

2022 Alfa Romeo Stelvio 2022 Mercedes-Benz Sprinter 1500 2022 Mercedes-Benz Sprinter 2500 2022 Mercedes-Benz Sprinter 3500 2022 RAM ProMaster 1500 2022 RAM ProMaster 2500

H7 Comparisons

9005 vs H7 H1 vs H7 H11 vs H7 H4 vs H7