What is the low beam headlight bulb size for a 2013 BMW X1?

The 2013 BMW X1 uses a H7 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 BMW X1?

The high beam bulb size for the 2013 BMW X1 is H7 LED.

Why are my 2013 BMW X1 headlights dim?

Dim headlights on a 2013 BMW X1 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H7 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 BMW X1 fog light?

The 2013 BMW X1 uses a H11 LED bulb for the fog light position.

Is the 2013 BMW X1 single or dual beam?

The 2013 BMW X1 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2013 BMW X1?

Yes, the 2013 BMW X1 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H7 LED LED conversion kit for the low beams.

Does the 2013 BMW X1 have fog lights?

Yes, the 2013 BMW X1 takes a H11 LED bulb for the fog light position.

How do I change the headlight on a 2013 BMW X1?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H7 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 BMW X1?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H7 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 BMW X1 headlights?

A pair of halogen H7 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 BMW X1?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H7 LED position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

This vehicle is part of the 2012–2013 BMW X1 generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 2013 BMW X1

What Size Bulbs Does a 2013 BMW X1 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2013 BMW X1 Have?

When it comes to nighttime visibility, the 2013 BMW X1 relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single H7 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the X1's 2012-2019 production span. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2013 BMW X1?

Upgrading to LED is one of the most effective ways to modernize your BMW's appearance and safety profile. Since your X1 uses a single H7 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because BMW utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H11 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2013 BMW X1 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H7 LED	Buy H7 LED →
High Beam	H7 LED	Buy H7 LED →
Fog Light	H11 LED	Buy H11 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	LED Bulb	Buy LED Bulb →
Turn Signal Front	12496 LED	Buy 12496 LED →
Turn Signal Rear	7506 LED	Buy 7506 LED →
Reverse Light	7506	Buy 7506 →
Dome Light	6418	Buy 6418 →
License Plate	LED Bulb	Buy LED Bulb →
Map Light	2886X	Buy 2886X →
Parking Light	2825	Buy 2825 →
Trunk Light	6411	Buy 6411 →