What is the low beam headlight bulb size for a 1996 BMW 318is?

The 1996 BMW 318is uses a 9006 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1996 BMW 318is?

The high beam bulb size for the 1996 BMW 318is is 9005 LED.

Why are my 1996 BMW 318is headlights dim?

Dim headlights on a 1996 BMW 318is can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9006 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1996 BMW 318is fog light?

The 1996 BMW 318is uses a H1 LED bulb for the fog light position.

Is the 1996 BMW 318is single or dual beam?

The 1996 BMW 318is uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1996 BMW 318is?

Yes, the 1996 BMW 318is comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9006 LED LED conversion kit for the low beams.

Does the 1996 BMW 318is have fog lights?

Yes, the 1996 BMW 318is takes a H1 LED bulb for the fog light position.

Did the 1996 BMW 318is change headlight bulb sizes from the previous year?

Yes — the 1996 BMW 318is uses different bulb sizes than the 1995 model. The 1996 generation introduced this bulb configuration.

Is the 1996 BMW 318is the first or last year to use 9006 LED bulbs?

The 1996 BMW 318is is the only year in the 1996 generation to use the 9006 LED bulb for the low beam headlight.

How do I change the headlight on a 1996 BMW 318is?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9006 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: BMW vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1996 BMW 318is?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9006 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1996 BMW 318is headlights?

A pair of halogen 9006 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1996 BMW 318is?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9006 LED position are available as direct plug-and-play replacements. Since the BMW uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1996 BMW 318is has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1996 BMW 318is

What Size Bulbs Does a 1996 BMW 318is Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1996 BMW 318is Have?

Owners of the 1996 BMW 318is will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9006 LED low beam and 9005 LED high beam bulbs for precise light distribution. This model belongs to the mid years of the 318is's 1991-1999 production span. Note that BMW vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1996 BMW 318is?

Upgrading to LED is one of the most effective ways to modernize your BMW's appearance and safety profile. We recommend starting your upgrade with the 9006 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Because BMW utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the H1 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1996 BMW 318is Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9006 LED	Buy 9006 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	H1 LED	Buy H1 LED →
Brake Light	7506 LED	Buy 7506 LED →
Side Marker	2825 LED	Buy 2825 LED →
Turn Signal Front	7528 LED	Buy 7528 LED →
Turn Signal Rear	7506 LED	Buy 7506 LED →
Dome Light	6411 or 6418	Buy 6411 or 6418 →
License Plate	6418	Buy 6418 →
Map Light	6411	Buy 6411 →
Parking Light	7528	Buy 7528 →
Reverse Light	7506	Buy 7506 →
Trunk Light	6418 or 6411	Buy 6418 or 6411 →
Tail Light	7528	Buy 7528 →

How do the 1996 BMW 318is's bulbs compare to other years?

The 1996 BMW 318is changed bulb sizes from 1995. The previous model year used a different configuration.

The 1997 model switched to a different bulb configuration.

This bulb configuration covers the 1996 model years. ← 1995 1997 →

Finding the best installation guide...

Other 318is Years

1999 1998 1997 1995 1994 1993 1992 1991

Other Vehicles That Use 9006 LED Bulbs

2020 Dodge Journey 2019 GMC Savana 2500 HD 2019 GMC Savana 3500 HD 2018 Chevrolet Express 2500 2015 Honda Civic 2015 Nissan Armada