What is the low beam headlight bulb size for a 2002 Audi S6?

The 2002 Audi S6 uses a H7 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2002 Audi S6?

The high beam bulb size for the 2002 Audi S6 is H7.

Why are my 2002 Audi S6 headlights dim?

Dim headlights on a 2002 Audi S6 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H7 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2002 Audi S6 fog light?

The 2002 Audi S6 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 2002 Audi S6 single or dual beam?

The 2002 Audi S6 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2002 Audi S6?

Yes, the 2002 Audi S6 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H7 LED conversion kit for the low beams.

Did the 2002 Audi S6 change headlight bulb sizes from the previous year?

Yes — the 2002 Audi S6 uses different bulb sizes than the 1997 model. The 2002 generation introduced this bulb configuration.

Is the 2002 Audi S6 the first or last year to use H7 bulbs?

The 2002 Audi S6 is the only year in the 2002 generation to use the H7 bulb for the low beam headlight.

How do I change the headlight on a 2002 Audi S6?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H7 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Audi vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2002 Audi S6?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H7 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2002 Audi S6 headlights?

A pair of halogen H7 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2002 Audi S6?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H7 position are available as direct plug-and-play replacements. Since the Audi uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 2002 Audi S6 has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 2002 Audi S6

What Size Bulbs Does a 2002 Audi S6 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2002 Audi S6 Have?

Lighting on the 2002 Audi S6 is managed by a total of 7 bulbs, covering everything from primary headlights to signal indicators. It features a standard lighting system powered by a halogen-based setup where a single H7 dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the S6's 1995-2018 production span. Note that Audi vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2002 Audi S6?

Upgrading to LED is one of the most effective ways to modernize your Audi's appearance and safety profile. Since your S6 uses a single H7 bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Because Audi utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

2002 Audi S6 Bulb Size Chart

Position	Bulb Size	Shop
High Beam	H7	Buy H7 →
Low Beam	H7	Buy H7 →
Side Marker	3457NA	Buy 3457NA →
Brake Light	7528	Buy 7528 →
Parking Light	W5W	Buy W5W →
Tail Light	7528	Buy 7528 →
Door Light	W5W	Buy W5W →

How do the 2002 Audi S6's bulbs compare to other years?

The 2002 Audi S6 changed bulb sizes from 1997. The previous model year used a different configuration.

The 2003 model switched to a different bulb configuration.

This bulb configuration covers the 2002 model years. ← 1997 2003 →

Finding the best installation guide...

Other S6 Years

2018 2017 2016 2015 2014 2013 2011 2010 2009 2008 2007 2003 1997 1996 1995

Other Vehicles That Use H7 Bulbs

2022 Alfa Romeo Stelvio 2022 Mercedes-Benz Sprinter 1500 2022 Mercedes-Benz Sprinter 2500 2022 Mercedes-Benz Sprinter 3500 2022 RAM ProMaster 1500 2022 RAM ProMaster 2500

H7 Comparisons

9005 vs H7 H1 vs H7 H11 vs H7 H4 vs H7