What is the low beam headlight bulb size for a 2013 Audi Allroad?

The 2013 Audi Allroad uses a H7 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 Audi Allroad?

The high beam bulb size for the 2013 Audi Allroad is HID-D3S LED.

Why are my 2013 Audi Allroad headlights dim?

Dim headlights on a 2013 Audi Allroad can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H7 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 Audi Allroad fog light?

The 2013 Audi Allroad uses a 64136 bulb for the fog light position.

Is the 2013 Audi Allroad single or dual beam?

The 2013 Audi Allroad uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2013 Audi Allroad?

Yes, the 2013 Audi Allroad comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H7 LED LED conversion kit for the low beams.

Does the 2013 Audi Allroad have fog lights?

Yes, the 2013 Audi Allroad takes a 64136 bulb for the fog light position.

How do I change the headlight on a 2013 Audi Allroad?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H7 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Audi vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 Audi Allroad?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H7 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 Audi Allroad headlights?

A pair of halogen H7 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 Audi Allroad?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H7 LED position are available as direct plug-and-play replacements. Since the Audi uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 2013 Audi Allroad

What Size Bulbs Does a 2013 Audi Allroad Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2013 Audi Allroad Have?

Lighting on the 2013 Audi Allroad is managed by a total of 12 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate H7 LED low beam and HID-D3S LED high beam bulbs for precise light distribution. This model belongs to the late years of the Allroad's 2002-2016 production span. Note that Audi vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2013 Audi Allroad?

Upgrading to LED is one of the most effective ways to modernize your Audi's appearance and safety profile. We recommend starting your upgrade with the H7 LED low beams, as they see the most use. Adding a matching HID-D3S LED LED kit later will complete the look and ensure consistent lighting performance. Because Audi utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 64136 fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2013 Audi Allroad Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H7 LED	Buy H7 LED →
High Beam	HID-D3S LED	Buy HID-D3S LED →
Fog Light	64136	Buy 64136 →
Brake Light	LED Bulb	Buy LED Bulb →
Dome Light	6411	Buy 6411 →
Side Marker	LED Bulb	Buy LED Bulb →
Turn Signal Front	12181NA	Buy 12181NA →
Map Light	2825	Buy 2825 →
Parking Light	LED Bulb	Buy LED Bulb →
Turn Signal Rear	12496	Buy 12496 →
Reverse Light	921	Buy 921 →
Trunk Light	2825	Buy 2825 →