What is the low beam headlight bulb size for a 1987 Acura Integra?

The 1987 Acura Integra uses a H6054 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1987 Acura Integra?

The high beam bulb size for the 1987 Acura Integra is H6054 LED.

Why are my 1987 Acura Integra headlights dim?

Dim headlights on a 1987 Acura Integra can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6054 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1987 Acura Integra fog light?

The 1987 Acura Integra uses a H3 LED bulb for the fog light position.

Is the 1987 Acura Integra single or dual beam?

The 1987 Acura Integra uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1987 Acura Integra?

Yes, the 1987 Acura Integra comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6054 LED LED conversion kit for the low beams.

Does the 1987 Acura Integra have fog lights?

Yes, the 1987 Acura Integra takes a H3 LED bulb for the fog light position.

Did the 1987 Acura Integra change headlight bulb sizes from the previous year?

No — the 1987 Acura Integra uses the same bulb sizes as the 1986 model. This configuration has been consistent across the 1986–1988 generation.

How do I change the headlight on a 1987 Acura Integra?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6054 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1987 Acura Integra?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6054 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1987 Acura Integra headlights?

A pair of halogen H6054 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1987 Acura Integra?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6054 LED position are available as direct plug-and-play replacements.

The 1987 Acura Integra shares its bulb sizes with the 1986–1988 generation.

Fitment Guaranteed for 1987 Acura Integra

What Size Bulbs Does a 1987 Acura Integra Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1987 Acura Integra Have?

When it comes to nighttime visibility, the 1987 Acura Integra relies on an arrangement of 12 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single H6054 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the Integra's 1986-2001 production span.

Can You Put LED Bulbs in a 1987 Acura Integra?

Upgrading to LED is one of the most effective ways to modernize your Acura's appearance and safety profile. Since your Integra uses a single H6054 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the H3 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1987 Acura Integra Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6054 LED	Buy H6054 LED →
High Beam	H6054 LED	Buy H6054 LED →
Fog Light	H3 LED	Buy H3 LED →
Brake Light	1156	Buy 1156 →
Dome Light	DE3423	Buy DE3423 →
Side Marker	168	Buy 168 →
Turn Signal Front	1156	Buy 1156 →
License Plate	67	Buy 67 →
Turn Signal Rear	1156	Buy 1156 →
Reverse Light	1156	Buy 1156 →
Parking Light	168	Buy 168 →
Trunk Light	DE3021	Buy DE3021 →

How do the 1987 Acura Integra's bulbs compare to other years?

The 1987 Acura Integra uses the same bulbs as the 1986 model.

The 1988 model continues with the same bulb sizes.

This bulb configuration covers the 1986–1988 model years. ← 1986 1988 →

Finding the best installation guide...

Other Integra Years

2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1986

More from Acura

2.5 TL 3.2 TL CL CSX EL ILX Legend MDX

Other Vehicles That Use H6054 LED Bulbs

2018 Chevrolet Express 3500 2016 Ford Econoline Super Duty 2010 Ford F-250 2010 Ford F-350 2010 Ford F-450 Super Duty 2010 Ford F-550 Super Duty