What is the low beam headlight bulb size for a 2006 Toyota Tacoma?

The 2006 Toyota Tacoma uses a 9003 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2006 Toyota Tacoma?

The high beam bulb size for the 2006 Toyota Tacoma is 9003 LED.

Why are my 2006 Toyota Tacoma headlights dim?

Dim headlights on a 2006 Toyota Tacoma can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9003 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2006 Toyota Tacoma fog light?

The 2006 Toyota Tacoma uses a 9145 LED bulb for the fog light position.

Is the 2006 Toyota Tacoma single or dual beam?

The 2006 Toyota Tacoma uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2006 Toyota Tacoma?

Yes, the 2006 Toyota Tacoma comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9003 LED LED conversion kit for the low beams.

Does the 2006 Toyota Tacoma have fog lights?

Yes, the 2006 Toyota Tacoma takes a 9145 LED bulb for the fog light position.

Did the 2006 Toyota Tacoma change headlight bulb sizes from the previous year?

Yes — the 2006 Toyota Tacoma uses different bulb sizes than the 2005 model. The 2006–2008 generation introduced this bulb configuration.

Is the 2006 Toyota Tacoma the first or last year to use 9003 LED bulbs?

The 2006 Toyota Tacoma is the first year in the 2006–2008 generation to use the 9003 LED bulb for the low beam headlight.

How do I change the headlight on a 2006 Toyota Tacoma?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9003 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2006 Toyota Tacoma?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9003 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2006 Toyota Tacoma headlights?

A pair of halogen 9003 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2006 Toyota Tacoma?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9003 LED position are available as direct plug-and-play replacements.

The 2006 Toyota Tacoma is the first model year to use this bulb configuration (2006–2008).

Fitment Guaranteed for 2006 Toyota Tacoma

What Size Bulbs Does a 2006 Toyota Tacoma Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2006 Toyota Tacoma Have?

When it comes to nighttime visibility, the 2006 Toyota Tacoma relies on an arrangement of 14 specialized bulbs. It features an extensive lighting system powered by a halogen-based setup where a single 9003 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Tacoma's 1995-2023 production span.

Can You Put LED Bulbs in a 2006 Toyota Tacoma?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Tacoma uses a single 9003 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the 9145 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2006 Toyota Tacoma Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9003 LED	Buy 9003 LED →
High Beam	9003 LED	Buy 9003 LED →
Fog Light	9145 LED	Buy 9145 LED →
Brake Light	168 LED	Buy 168 LED →
Side Marker	2827 LED	Buy 2827 LED →
Turn Signal Front	4157NA LED	Buy 4157NA LED →
Turn Signal Rear	3157A LED	Buy 3157A LED →
Reverse Light	921	Buy 921 →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	168	Buy 168 →
Parking Light	4157NA	Buy 4157NA →
Trunk Light	LED Light	Buy LED Light →
Tail Light	3157CK	Buy 3157CK →

How do the 2006 Toyota Tacoma's bulbs compare to other years?

The 2006 Toyota Tacoma changed bulb sizes from 2005. The previous model year used a different configuration.

The 2007 model continues with the same bulb sizes.

This bulb configuration covers the 2006–2008 model years. ← 2005 2007 →

Finding the best installation guide...

Other Tacoma Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use 9003 LED Bulbs

2023 Kia Rio 2020 Honda Fit 2019 MINI Cooper 2019 Nissan Micra 2019 Nissan Versa 2018 Honda HR-V