What is the low beam headlight bulb size for a 1986 Toyota Pickup?

The 1986 Toyota Pickup uses a 6052 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1986 Toyota Pickup?

The high beam bulb size for the 1986 Toyota Pickup is 6052 LED.

Why are my 1986 Toyota Pickup headlights dim?

Dim headlights on a 1986 Toyota Pickup can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 6052 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1986 Toyota Pickup fog light?

The 1986 Toyota Pickup uses a LED Fog Light bulb for the fog light position.

Is the 1986 Toyota Pickup single or dual beam?

The 1986 Toyota Pickup uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1986 Toyota Pickup?

Yes, the 1986 Toyota Pickup comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 6052 LED LED conversion kit for the low beams.

Does the 1986 Toyota Pickup have fog lights?

Yes, the 1986 Toyota Pickup takes a LED Fog Light bulb for the fog light position.

Did the 1986 Toyota Pickup change headlight bulb sizes from the previous year?

Yes — the 1986 Toyota Pickup uses different bulb sizes than the 1985 model. The 1986 generation introduced this bulb configuration.

Is the 1986 Toyota Pickup the first or last year to use 6052 LED bulbs?

The 1986 Toyota Pickup is the only year in the 1986 generation to use the 6052 LED bulb for the low beam headlight.

How do I change the headlight on a 1986 Toyota Pickup?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 6052 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1986 Toyota Pickup?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 6052 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1986 Toyota Pickup headlights?

A pair of halogen 6052 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1986 Toyota Pickup?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 6052 LED position are available as direct plug-and-play replacements.

The 1986 Toyota Pickup has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1986 Toyota Pickup

What Size Bulbs Does a 1986 Toyota Pickup Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1986 Toyota Pickup Have?

The 1986 Toyota Pickup utilizes a refined lighting configuration featuring 12 distinct bulb positions. It features an extensive lighting system powered by a halogen-based setup where a single 6052 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Pickup's 1975-1995 production span.

Can You Put LED Bulbs in a 1986 Toyota Pickup?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Pickup uses a single 6052 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1986 Toyota Pickup Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	6052 LED	Buy 6052 LED →
High Beam	6052 LED	Buy 6052 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	Brake Light Assembly	Buy Brake Light Assembly →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	1073 LED	Buy 1073 LED →
Turn Signal Rear	1073 LED	Buy 1073 LED →
Reverse Light	1073	Buy 1073 →
Dome Light	DE3175	Buy DE3175 →
License Plate	194 or 89	Buy 194 or 89 →
Parking Light	194	Buy 194 →
Trunk Light	LED Light	Buy LED Light →

How do the 1986 Toyota Pickup's bulbs compare to other years?

The 1986 Toyota Pickup changed bulb sizes from 1985. The previous model year used a different configuration.

The 1987 model switched to a different bulb configuration.

This bulb configuration covers the 1986 model years. ← 1985 1987 →

Finding the best installation guide...

Other Pickup Years

1995 1994 1993 1992 1991 1990 1989 1988 1987 1985 1984 1983 1982 1980 1979 1978 1977 1975

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use 6052 LED Bulbs

1991 Dodge B150 1991 Dodge B250 1991 Dodge B350 1991 Jeep Grand Wagoneer 1991 Subaru XT 1989 Chrysler Conquest