What is the low beam headlight bulb size for a 1972 Toyota Corona?

The 1972 Toyota Corona uses a 4000 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1972 Toyota Corona?

The high beam bulb size for the 1972 Toyota Corona is 4000 LED.

Why are my 1972 Toyota Corona headlights dim?

Dim headlights on a 1972 Toyota Corona can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 4000 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1972 Toyota Corona fog light?

The 1972 Toyota Corona uses a LED Fog Light bulb for the fog light position.

Is the 1972 Toyota Corona single or dual beam?

The 1972 Toyota Corona uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1972 Toyota Corona?

Yes, the 1972 Toyota Corona comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 4000 LED LED conversion kit for the low beams.

Does the 1972 Toyota Corona have fog lights?

Yes, the 1972 Toyota Corona takes a LED Fog Light bulb for the fog light position.

Did the 1972 Toyota Corona change headlight bulb sizes from the previous year?

No — the 1972 Toyota Corona uses the same bulb sizes as the 1971 model. This configuration has been consistent across the 1969–1972 generation.

Is the 1972 Toyota Corona the first or last year to use 4000 LED bulbs?

The 1972 Toyota Corona is the last year in the 1969–1972 generation to use the 4000 LED bulb for the low beam headlight.

How do I change the headlight on a 1972 Toyota Corona?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 4000 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1972 Toyota Corona?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 4000 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1972 Toyota Corona headlights?

A pair of halogen 4000 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1972 Toyota Corona?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 4000 LED position are available as direct plug-and-play replacements.

The 1972 Toyota Corona is the last model year to use this bulb configuration (1969–1972).

Fitment Guaranteed for 1972 Toyota Corona

What Size Bulbs Does a 1972 Toyota Corona Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1972 Toyota Corona Have?

Owners of the 1972 Toyota Corona will find a total of 11 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single 4000 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the early years of the Corona's 1969-1982 production span.

Can You Put LED Bulbs in a 1972 Toyota Corona?

For a Toyota built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. Since your Corona uses a single 4000 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the LED Fog Light fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

1972 Toyota Corona Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	4000 LED	Buy 4000 LED →
High Beam	4000 LED	Buy 4000 LED →
Fog Light	LED Fog Light	Buy LED Fog Light →
Brake Light	1157	Buy 1157 →
Turn Signal Front	1157 LED	Buy 1157 LED →
Turn Signal Rear	1157 LED	Buy 1157 LED →
Reverse Light	N/A	Buy N/A →
Dome Light	DE3175	Buy DE3175 →
License Plate	89	Buy 89 →
Parking Light	1157	Buy 1157 →
Trunk Light	LED Light	Buy LED Light →
Tail Light	1157	Buy 1157 →

How do the 1972 Toyota Corona's bulbs compare to other years?

The 1972 Toyota Corona uses the same bulbs as the 1971 model.

The 1973 model switched to a different bulb configuration.

This bulb configuration covers the 1969–1972 model years. ← 1971 1973 →

Finding the best installation guide...

Other Corona Years

1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1971 1970 1969

More from Toyota

4Runner 4Runner Fog 86 86 Fog Avalon C-HR Camry Camry Fog

Other Vehicles That Use 4000 LED Bulbs

1996 Chevrolet W3500 Tiltmaster 1996 Chevrolet W4500 Tiltmaster 1996 Chevrolet W5500 Tiltmaster 1988 BMW 535is 1987 BMW 535i 1983 Peugeot 505