What is the low beam headlight bulb size for a 1987 Suzuki SP200?

The 1987 Suzuki SP200 uses a H4 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1987 Suzuki SP200?

The high beam bulb size for the 1987 Suzuki SP200 is N/A.

Why are my 1987 Suzuki SP200 headlights dim?

Dim headlights on a 1987 Suzuki SP200 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H4 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1987 Suzuki SP200 fog light?

The 1987 Suzuki SP200 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1987 Suzuki SP200 single or dual beam?

The 1987 Suzuki SP200 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1987 Suzuki SP200?

Yes, the 1987 Suzuki SP200 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H4 LED conversion kit for the low beams.

Did the 1987 Suzuki SP200 change headlight bulb sizes from the previous year?

No — the 1987 Suzuki SP200 uses the same bulb sizes as the 1986 model. This configuration has been consistent across the 1986–1988 generation.

How do I change the headlight on a 1987 Suzuki SP200?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H4 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1987 Suzuki SP200?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H4 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1987 Suzuki SP200 headlights?

A pair of halogen H4 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1987 Suzuki SP200?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H4 position are available as direct plug-and-play replacements.

The 1987 Suzuki SP200 shares its bulb sizes with the 1986–1988 generation.

Fitment Guaranteed for 1987 Suzuki SP200

What Size Bulbs Does a 1987 Suzuki SP200 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1987 Suzuki SP200 Have?

Owners of the 1987 Suzuki SP200 will find a total of 1 lighting elements throughout the vehicle's exterior. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H4 low beam and high beam bulbs for precise light distribution. This model belongs to the mid years of the SP200's 1986-1988 production span.

Can You Put LED Bulbs in a 1987 Suzuki SP200?

Upgrading to LED is one of the most effective ways to modernize your Suzuki's appearance and safety profile. We recommend starting your upgrade with the H4 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance.