What is the low beam headlight bulb size for a 2010 Suzuki Equator?

The 2010 Suzuki Equator uses a 9007 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2010 Suzuki Equator?

The high beam bulb size for the 2010 Suzuki Equator is 9007 LED.

Why are my 2010 Suzuki Equator headlights dim?

Dim headlights on a 2010 Suzuki Equator can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9007 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2010 Suzuki Equator fog light?

The 2010 Suzuki Equator uses a H11 LED bulb for the fog light position.

Is the 2010 Suzuki Equator single or dual beam?

The 2010 Suzuki Equator uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2010 Suzuki Equator?

Yes, the 2010 Suzuki Equator comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9007 LED LED conversion kit for the low beams.

Does the 2010 Suzuki Equator have fog lights?

Yes, the 2010 Suzuki Equator takes a H11 LED bulb for the fog light position.

Did the 2010 Suzuki Equator change headlight bulb sizes from the previous year?

No — the 2010 Suzuki Equator uses the same bulb sizes as the 2009 model. This configuration has been consistent across the 2009–2011 generation.

How do I change the headlight on a 2010 Suzuki Equator?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9007 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2010 Suzuki Equator?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9007 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2010 Suzuki Equator headlights?

A pair of halogen 9007 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2010 Suzuki Equator?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9007 LED position are available as direct plug-and-play replacements.

The 2010 Suzuki Equator shares its bulb sizes with the 2009–2011 generation.

Fitment Guaranteed for 2010 Suzuki Equator

What Size Bulbs Does a 2010 Suzuki Equator Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2010 Suzuki Equator Have?

Owners of the 2010 Suzuki Equator will find a total of 14 lighting elements throughout the vehicle's exterior. It features an extensive lighting system powered by a halogen-based setup where a single 9007 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Equator's 2009-2012 production span.

Can You Put LED Bulbs in a 2010 Suzuki Equator?

Upgrading to LED is one of the most effective ways to modernize your Suzuki's appearance and safety profile. Since your Equator uses a single 9007 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the H11 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2010 Suzuki Equator Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9007 LED	Buy 9007 LED →
High Beam	9007 LED	Buy 9007 LED →
Fog Light	H11 LED	Buy H11 LED →
Brake Light	921 LED	Buy 921 LED →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	7444NA LED	Buy 7444NA LED →
Turn Signal Rear	3156AK LED	Buy 3156AK LED →
Reverse Light	921	Buy 921 →
Dome Light	6411	Buy 6411 →
License Plate	168	Buy 168 →
Map Light	DE3425	Buy DE3425 →
Parking Light	7444NA	Buy 7444NA →
Trunk Light	921	Buy 921 →
Tail Light	3157	Buy 3157 →

How do the 2010 Suzuki Equator's bulbs compare to other years?

The 2010 Suzuki Equator uses the same bulbs as the 2009 model.

The 2011 model continues with the same bulb sizes.

This bulb configuration covers the 2009–2011 model years. ← 2009 2011 →

Finding the best installation guide...

Other Equator Years

2012 2011 2009

More from Suzuki

Aerio Esteem Forenza Forsa GR650 Tempter GV1200 Madura GV1400 Cavalcade GV700GL Madura

Other Vehicles That Use 9007 LED Bulbs

2019 Mitsubishi Mirage G4 2019 Nissan Frontier 2019 Nissan Versa Note 2015 Nissan Xterra 2014 Nissan Juke 2012 Mitsubishi Galant