What is the low beam headlight bulb size for a 1975 Subaru 1400?

The 1975 Subaru 1400 uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1975 Subaru 1400?

The high beam bulb size for the 1975 Subaru 1400 is N/A.

Why are my 1975 Subaru 1400 headlights dim?

Dim headlights on a 1975 Subaru 1400 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1975 Subaru 1400 fog light?

The 1975 Subaru 1400 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1975 Subaru 1400 single or dual beam?

The 1975 Subaru 1400 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1975 Subaru 1400?

Yes, the 1975 Subaru 1400 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1975 Subaru 1400 change headlight bulb sizes from the previous year?

No — the 1975 Subaru 1400 uses the same bulb sizes as the 1974 model. This configuration has been consistent across the 1973–1975 generation.

Is the 1975 Subaru 1400 the first or last year to use H6024 bulbs?

The 1975 Subaru 1400 is the last year in the 1973–1975 generation to use the H6024 bulb for the low beam headlight.

How do I change the headlight on a 1975 Subaru 1400?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1975 Subaru 1400?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1975 Subaru 1400 headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1975 Subaru 1400?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements.

The 1975 Subaru 1400 is the last model year to use this bulb configuration (1973–1975).

Fitment Guaranteed for 1975 Subaru 1400

What Size Bulbs Does a 1975 Subaru 1400 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1975 Subaru 1400 Have?

Owners of the 1975 Subaru 1400 will find a total of 1 lighting elements throughout the vehicle's exterior. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and high beam bulbs for precise light distribution. This model belongs to the late years of the 1400's 1973-1975 production span.

Can You Put LED Bulbs in a 1975 Subaru 1400?

Upgrading to LED is one of the most effective ways to modernize your Subaru's appearance and safety profile. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance.