What is the low beam headlight bulb size for a 2013 Ram 4500?

The 2013 RAM 4500 uses a 9012 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2013 Ram 4500?

The high beam bulb size for the 2013 RAM 4500 is 9005 LED.

Why are my 2013 Ram 4500 headlights dim?

Dim headlights on a 2013 RAM 4500 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a 9012 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2013 Ram 4500 fog light?

The 2013 RAM 4500 uses a 9006 LED bulb for the fog light position.

Is the 2013 Ram 4500 single or dual beam?

The 2013 RAM 4500 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2013 Ram 4500?

Yes, the 2013 RAM 4500 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a 9012 LED LED conversion kit for the low beams.

Does the 2013 Ram 4500 have fog lights?

Yes, the 2013 RAM 4500 takes a 9006 LED bulb for the fog light position.

How do I change the headlight on a 2013 Ram 4500?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old 9012 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: RAM vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2013 Ram 4500?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved 9012 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2013 Ram 4500 headlights?

A pair of halogen 9012 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2013 Ram 4500?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the 9012 LED position are available as direct plug-and-play replacements. Since the RAM uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 2013 RAM 4500

What Size Bulbs Does a 2013 RAM 4500 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2013 RAM 4500 Have?

When it comes to nighttime visibility, the 2013 RAM 4500 relies on an arrangement of 12 specialized bulbs. It features an extensive lighting system powered by a dual-bulb halogen configuration using separate 9012 LED low beam and 9005 LED high beam bulbs for precise light distribution. This model belongs to the early years of the 4500's 2011-2019 production span. Note that RAM vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2013 RAM 4500?

For a RAM built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the 9012 LED low beams, as they see the most use. Adding a matching 9005 LED LED kit later will complete the look and ensure consistent lighting performance. Because RAM utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors. Don't forget the 9006 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2013 RAM 4500 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	9012 LED	Buy 9012 LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	9006 LED	Buy 9006 LED →
Brake Light	921 LED	Buy 921 LED →
Side Marker	3057K LED	Buy 3057K LED →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	3057K LED	Buy 3057K LED →
License Plate	194	Buy 194 →
Map Light	578	Buy 578 →
Parking Light	3157NA	Buy 3157NA →
Reverse Light	921 or 7440	Buy 921 or 7440 →
Trunk Light	921	Buy 921 →