What is the low beam headlight bulb size for a 1996 Porsche 911?

The 1996 Porsche 911 uses a H1 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1996 Porsche 911?

The high beam bulb size for the 1996 Porsche 911 is H1.

Why are my 1996 Porsche 911 headlights dim?

Dim headlights on a 1996 Porsche 911 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H1 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1996 Porsche 911 fog light?

The 1996 Porsche 911 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1996 Porsche 911 single or dual beam?

The 1996 Porsche 911 uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 1996 Porsche 911?

Yes, the 1996 Porsche 911 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H1 LED conversion kit for the low beams.

Did the 1996 Porsche 911 change headlight bulb sizes from the previous year?

Yes — the 1996 Porsche 911 uses different bulb sizes than the 1995 model. The 1996 generation introduced this bulb configuration.

Is the 1996 Porsche 911 the first or last year to use H1 bulbs?

The 1996 Porsche 911 is the only year in the 1996 generation to use the H1 bulb for the low beam headlight.

How do I change the headlight on a 1996 Porsche 911?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H1 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1996 Porsche 911?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H1 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1996 Porsche 911 headlights?

A pair of halogen H1 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1996 Porsche 911?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H1 position are available as direct plug-and-play replacements.

The 1996 Porsche 911 has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1996 Porsche 911

What Size Bulbs Does a 1996 Porsche 911 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Hard (Tight clearances)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1996 Porsche 911 Have?

The 1996 Porsche 911 utilizes a refined lighting configuration featuring 7 distinct bulb positions. It features a standard lighting system powered by a halogen-based setup where a single H1 dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the 911's 1965-2019 production span.

Can You Put LED Bulbs in a 1996 Porsche 911?

Upgrading to LED is one of the most effective ways to modernize your Porsche's appearance and safety profile. Since your 911 uses a single H1 bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb.

1996 Porsche 911 Bulb Size Chart

Position	Bulb Size	Shop
Side Marker	3893	Buy 3893 →
High Beam	H1	Buy H1 →
Turn Signal Front	7528	Buy 7528 →
Low Beam	H1	Buy H1 →
Parking Light	7528	Buy 7528 →
Tail Light	7528	Buy 7528 →
Brake Light	7528	Buy 7528 →