What is the low beam headlight bulb size for a 1967 Plymouth Belvedere II?

The 1967 Plymouth Belvedere II uses a H5006 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1967 Plymouth Belvedere II?

The high beam bulb size for the 1967 Plymouth Belvedere II is H5001.

Why are my 1967 Plymouth Belvedere II headlights dim?

Dim headlights on a 1967 Plymouth Belvedere II can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H5006 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1967 Plymouth Belvedere II fog light?

The 1967 Plymouth Belvedere II typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1967 Plymouth Belvedere II single or dual beam?

The 1967 Plymouth Belvedere II uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1967 Plymouth Belvedere II?

Yes, the 1967 Plymouth Belvedere II comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H5006 LED conversion kit for the low beams.

Did the 1967 Plymouth Belvedere II change headlight bulb sizes from the previous year?

Yes — the 1967 Plymouth Belvedere II uses different bulb sizes than the 1966 model. The 1967 generation introduced this bulb configuration.

Is the 1967 Plymouth Belvedere II the first or last year to use H5006 bulbs?

The 1967 Plymouth Belvedere II is the only year in the 1967 generation to use the H5006 bulb for the low beam headlight.

How do I change the headlight on a 1967 Plymouth Belvedere II?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H5006 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1967 Plymouth Belvedere II?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H5006 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1967 Plymouth Belvedere II headlights?

A pair of halogen H5006 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1967 Plymouth Belvedere II?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H5006 position are available as direct plug-and-play replacements.

The 1967 Plymouth Belvedere II has a unique bulb configuration not shared with adjacent model years.

Fitment Guaranteed for 1967 Plymouth Belvedere II

What Size Bulbs Does a 1967 Plymouth Belvedere II Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1967 Plymouth Belvedere II Have?

Owners of the 1967 Plymouth Belvedere II will find a total of 2 lighting elements throughout the vehicle's exterior. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H5006 low beam and H5001 high beam bulbs for precise light distribution.

Can You Put LED Bulbs in a 1967 Plymouth Belvedere II?

Upgrading to LED is one of the most effective ways to modernize your Plymouth's appearance and safety profile. We recommend starting your upgrade with the H5006 low beams, as they see the most use. Adding a matching H5001 LED kit later will complete the look and ensure consistent lighting performance.

1967 Plymouth Belvedere II Bulb Size Chart

Position	Bulb Size	Shop
High Beam	H5001	Buy H5001 →
Low Beam	H5006	Buy H5006 →

How do the 1967 Plymouth Belvedere II's bulbs compare to other years?

The 1967 Plymouth Belvedere II changed bulb sizes from 1966. The previous model year used a different configuration.

This bulb configuration covers the 1967 model years. ← 1966

Finding the best installation guide...

Other Belvedere II Years

1966 1965

More from Plymouth

Acclaim Arrow Arrow Pickup Arrow Truck Barracuda Belvedere Belvedere II Breeze

Other Vehicles That Use H5006 Bulbs

1992 BMW 3 Series 1991 BMW 318i 1991 BMW 325i 1991 BMW 325iX 1991 BMW 325is 1991 Isuzu Impulse