What is the low beam headlight bulb size for a 1967 Plymouth Barracuda?

The 1967 Plymouth Barracuda uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1967 Plymouth Barracuda?

The high beam bulb size for the 1967 Plymouth Barracuda is N/A.

Why are my 1967 Plymouth Barracuda headlights dim?

Dim headlights on a 1967 Plymouth Barracuda can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1967 Plymouth Barracuda fog light?

The 1967 Plymouth Barracuda typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1967 Plymouth Barracuda single or dual beam?

The 1967 Plymouth Barracuda uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1967 Plymouth Barracuda?

Yes, the 1967 Plymouth Barracuda comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1967 Plymouth Barracuda change headlight bulb sizes from the previous year?

No — the 1967 Plymouth Barracuda uses the same bulb sizes as the 1966 model. This configuration has been consistent across the 1964–1968 generation.

How do I change the headlight on a 1967 Plymouth Barracuda?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1967 Plymouth Barracuda?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1967 Plymouth Barracuda headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1967 Plymouth Barracuda?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements.

The 1967 Plymouth Barracuda shares its bulb sizes with the 1964–1968 generation.

Fitment Guaranteed for 1967 Plymouth Barracuda

What Size Bulbs Does a 1967 Plymouth Barracuda Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1967 Plymouth Barracuda Have?

Lighting on the 1967 Plymouth Barracuda is managed by a total of 1 bulbs, covering everything from primary headlights to signal indicators. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and high beam bulbs for precise light distribution. This model belongs to the mid years of the Barracuda's 1964-1974 production span.

Can You Put LED Bulbs in a 1967 Plymouth Barracuda?

Upgrading to LED is one of the most effective ways to modernize your Plymouth's appearance and safety profile. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance.

1967 Plymouth Barracuda Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6024	Buy H6024 →

How do the 1967 Plymouth Barracuda's bulbs compare to other years?

The 1967 Plymouth Barracuda uses the same bulbs as the 1966 model.

The 1968 model continues with the same bulb sizes.

This bulb configuration covers the 1964–1968 model years. ← 1966 1968 →

Finding the best installation guide...

Other Barracuda Years

1974 1973 1972 1971 1970 1969 1968 1966 1965 1964

More from Plymouth

Acclaim Arrow Arrow Pickup Arrow Truck Belvedere Belvedere II Breeze Caravelle

Other Vehicles That Use H6024 Bulbs

2006 Hummer H1 1998 Bentley Turbo R 1997 Mazda Miata 1996 Mazda MX-5 Miata 1995 Land Rover Range Rover 1991 Mitsubishi Montero