What is the low beam headlight bulb size for a 2008 Mitsubishi Raider?

The 2008 Mitsubishi Raider uses a H13 LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2008 Mitsubishi Raider?

The high beam bulb size for the 2008 Mitsubishi Raider is H13 LED.

Why are my 2008 Mitsubishi Raider headlights dim?

Dim headlights on a 2008 Mitsubishi Raider can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H13 LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2008 Mitsubishi Raider fog light?

The 2008 Mitsubishi Raider uses a 9145 LED bulb for the fog light position.

Is the 2008 Mitsubishi Raider single or dual beam?

The 2008 Mitsubishi Raider uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2008 Mitsubishi Raider?

Yes, the 2008 Mitsubishi Raider comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H13 LED LED conversion kit for the low beams.

Does the 2008 Mitsubishi Raider have fog lights?

Yes, the 2008 Mitsubishi Raider takes a 9145 LED bulb for the fog light position.

How do I change the headlight on a 2008 Mitsubishi Raider?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H13 LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2008 Mitsubishi Raider?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H13 LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2008 Mitsubishi Raider headlights?

A pair of halogen H13 LED bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2008 Mitsubishi Raider?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H13 LED position are available as direct plug-and-play replacements.

This vehicle is part of the 2006–2009 Mitsubishi Raider generation. All models in this range share identical light bulb sizes.

Fitment Guaranteed for 2008 Mitsubishi Raider

What Size Bulbs Does a 2008 Mitsubishi Raider Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 2008 Mitsubishi Raider Have?

Lighting on the 2008 Mitsubishi Raider is managed by a total of 13 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by a halogen-based setup where a single H13 LED dual-filament bulb handles both low and high beam duties within the same reflector. This model belongs to the mid years of the Raider's 2006-2009 production span.

Can You Put LED Bulbs in a 2008 Mitsubishi Raider?

Upgrading to LED is one of the most effective ways to modernize your Mitsubishi's appearance and safety profile. Since your Raider uses a single H13 LED bulb for both high and low beams, ensure your chosen LED kit is "dual-beam" compatible. This allows the LED circuitry to mimic the two-filament design of the original halogen bulb. Don't forget the 9145 LED fog lights; switching these to LED can dramatically improve your visibility in adverse weather.

2008 Mitsubishi Raider Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H13 LED	Buy H13 LED →
High Beam	H13 LED	Buy H13 LED →
Fog Light	9145 LED	Buy 9145 LED →
Brake Light	921 LED	Buy 921 LED →
Side Marker	3157K LED	Buy 3157K LED →
Turn Signal Front	3157NA LED	Buy 3157NA LED →
Turn Signal Rear	3157K LED	Buy 3157K LED →
Dome Light	578	Buy 578 →
License Plate	168	Buy 168 →
Map Light	192	Buy 192 →
Parking Light	3157NA	Buy 3157NA →
Reverse Light	3157K	Buy 3157K →
Trunk Light	912	Buy 912 →

Installation Guide

Open in YouTube →

Video suggestion: Installation GuideBy YouTube

Other Raider Years

2009 2006

More from Mitsubishi

3000GT Cordia Diamante Eclipse Eclipse Cross Endeavor Expo Galant

Other Vehicles That Use H13 LED Bulbs

2019 Ford E-350 Super Duty 2019 Jeep Renegade 2019 Jeep Wrangler 2019 Nissan NV1500 2019 Nissan NV200 2019 Nissan NV2500