What is the low beam headlight bulb size for a 2010 Land Rover Range Rover?

The 2010 Land Rover Range Rover uses a HID-D3S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2010 Land Rover Range Rover?

The high beam bulb size for the 2010 Land Rover Range Rover is HID-D3S LED.

Why are my 2010 Land Rover Range Rover headlights dim?

Dim headlights on a 2010 Land Rover Range Rover can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D3S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2010 Land Rover Range Rover fog light?

The 2010 Land Rover Range Rover uses a H11 LED bulb for the fog light position.

Is the 2010 Land Rover Range Rover single or dual beam?

The 2010 Land Rover Range Rover uses a single bulb (dual filament) headlight system. This means one bulb controls both high and low beams.

Can I install LED bulbs on my 2010 Land Rover Range Rover?

Yes, the 2010 Land Rover Range Rover comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D3S LED LED conversion kit for the low beams.

Does the 2010 Land Rover Range Rover have fog lights?

Yes, the 2010 Land Rover Range Rover takes a H11 LED bulb for the fog light position.

Did the 2010 Land Rover Range Rover change headlight bulb sizes from the previous year?

Yes — the 2010 Land Rover Range Rover uses different bulb sizes than the 2009 model. The 2010–2011 generation introduced this bulb configuration.

Is the 2010 Land Rover Range Rover the first or last year to use HID-D3S LED bulbs?

The 2010 Land Rover Range Rover is the first year in the 2010–2011 generation to use the HID-D3S LED bulb for the low beam headlight.

How do I change the headlight on a 2010 Land Rover Range Rover?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D3S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2010 Land Rover Range Rover?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D3S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2010 Land Rover Range Rover headlights?

A pair of HID HID-D3S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2010 Land Rover Range Rover?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D3S LED position are available as direct plug-and-play replacements.

The 2010 Land-Rover Range Rover is the first model year to use this bulb configuration (2010–2011).

Fitment Guaranteed for 2010 Land-Rover Range Rover

What Size Bulbs Does a 2010 Land-Rover Range Rover Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2010 Land-Rover Range Rover Have?

Lighting on the 2010 Land-Rover Range Rover is managed by a total of 13 bulbs, covering everything from primary headlights to signal indicators. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D3S projector housings for high-intensity output.

Can You Put LED Bulbs in a 2010 Land-Rover Range Rover?

The 2010 Land-Rover Range Rover is already equipped with factory D3S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the H11 LED fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2010 Land-Rover Range Rover Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D3S LED	Buy HID-D3S LED →
High Beam	HID-D3S LED	Buy HID-D3S LED →
Fog Light	H11 LED	Buy H11 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	LED Bulb	Buy LED Bulb →
Turn Signal Front	LED Bulb	Buy LED Bulb →
Turn Signal Rear	LED Bulb	Buy LED Bulb →
Reverse Light	64132	Buy 64132 →
Dome Light	2886X	Buy 2886X →
License Plate	2825	Buy 2825 →
Map Light	2886X	Buy 2886X →
Parking Light	LED Bulb	Buy LED Bulb →
Trunk Light	2886X	Buy 2886X →

How do the 2010 Land-Rover Range Rover's bulbs compare to other years?

The 2010 Land-Rover Range Rover changed bulb sizes from 2009. The previous model year used a different configuration.

The 2011 model continues with the same bulb sizes.

This bulb configuration covers the 2010–2011 model years. ← 2009 2011 →

Finding the best installation guide...

Other Range Rover Years

2019 2018 2017 2016 2015 2014 2013 2012 2011 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988

More from Land-Rover

Defender 110 Defender 90 Discovery Discovery Sport Freelander LR2 LR3 LR4

Other Vehicles That Use HID-D3S LED Bulbs

2023 Chevrolet Camaro 2022 Dodge Charger 2022 Dodge Durango 2022 Hyundai Ioniq 2022 Kia Sportage 2021 Dodge Challenger