What is the low beam headlight bulb size for a 1972 Jeep DJ5?

The 1972 Jeep DJ5 uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1972 Jeep DJ5?

The high beam bulb size for the 1972 Jeep DJ5 is 194.

Why are my 1972 Jeep DJ5 headlights dim?

Dim headlights on a 1972 Jeep DJ5 can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1972 Jeep DJ5 fog light?

The 1972 Jeep DJ5 typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1972 Jeep DJ5 single or dual beam?

The 1972 Jeep DJ5 uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1972 Jeep DJ5?

Yes, the 1972 Jeep DJ5 comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1972 Jeep DJ5 change headlight bulb sizes from the previous year?

Yes — the 1972 Jeep DJ5 uses different bulb sizes than the 1971 model. The 1972–1973 generation introduced this bulb configuration.

Is the 1972 Jeep DJ5 the first or last year to use H6024 bulbs?

The 1972 Jeep DJ5 is the first year in the 1972–1973 generation to use the H6024 bulb for the low beam headlight.

How do I change the headlight on a 1972 Jeep DJ5?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1972 Jeep DJ5?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1972 Jeep DJ5 headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1972 Jeep DJ5?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1972 Jeep DJ5 is the first model year to use this bulb configuration (1972–1973).

Fitment Guaranteed for 1972 Jeep DJ5

What Size Bulbs Does a 1972 Jeep DJ5 Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1972 Jeep DJ5 Have?

Lighting on the 1972 Jeep DJ5 is managed by a total of 3 bulbs, covering everything from primary headlights to signal indicators. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and 194 high beam bulbs for precise light distribution. This model belongs to the mid years of the DJ5's 1965-1983 production span. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1972 Jeep DJ5?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching 194 LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1972 Jeep DJ5 Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6024	Buy H6024 →
Side Marker	194	Buy 194 →
High Beam	194	Buy 194 →

How do the 1972 Jeep DJ5's bulbs compare to other years?

The 1972 Jeep DJ5 changed bulb sizes from 1971. The previous model year used a different configuration.

The 1973 model continues with the same bulb sizes.

This bulb configuration covers the 1972–1973 model years. ← 1971 1973 →

Finding the best installation guide...

Other DJ5 Years

1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1971 1970 1969 1968 1967 1965

Other Vehicles That Use H6024 Bulbs

2006 Hummer H1 1998 Bentley Turbo R 1997 Mazda Miata 1996 Mazda MX-5 Miata 1995 Land Rover Range Rover 1991 Mitsubishi Montero