What is the low beam headlight bulb size for a 2009 Jeep Commander?

The 2009 Jeep Commander uses a HID-D1S LED bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 2009 Jeep Commander?

The high beam bulb size for the 2009 Jeep Commander is 9005 LED.

Why are my 2009 Jeep Commander headlights dim?

Dim headlights on a 2009 Jeep Commander can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a HID-D1S LED LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 2009 Jeep Commander fog light?

The 2009 Jeep Commander uses a 9145 LED bulb for the fog light position.

Is the 2009 Jeep Commander single or dual beam?

The 2009 Jeep Commander uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 2009 Jeep Commander?

Yes, the 2009 Jeep Commander comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a HID-D1S LED LED conversion kit for the low beams.

Does the 2009 Jeep Commander have fog lights?

Yes, the 2009 Jeep Commander takes a 9145 LED bulb for the fog light position.

How do I change the headlight on a 2009 Jeep Commander?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old HID-D1S LED bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 2009 Jeep Commander?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved HID-D1S LED LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 2009 Jeep Commander headlights?

A pair of HID HID-D1S LED bulbs costs $50 to $150. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 2009 Jeep Commander?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the HID-D1S LED position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

Fitment Guaranteed for 2009 Jeep Commander

What Size Bulbs Does a 2009 Jeep Commander Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$50 - $150 (HID System)

What Lighting System Does the 2009 Jeep Commander Have?

When it comes to nighttime visibility, the 2009 Jeep Commander relies on an arrangement of 13 specialized bulbs. It features an extensive lighting system powered by premium factory HID/Xenon technology utilizing D1S projector housings for high-intensity output. This model belongs to the late years of the Commander's 2006-2010 production span. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 2009 Jeep Commander?

The 2009 Jeep Commander is already equipped with factory D1S HID/Xenon headlights. Since HID technology already provides exceptional brightness, we recommend staying with high-quality OEM replacement bulbs rather than attempting an LED retrofit for the primary headlights. However, the 9145 LED fog lights are typically halogen and are excellent candidates for an LED upgrade to match the color temperature of your HID headlights.

2009 Jeep Commander Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	HID-D1S LED	Buy HID-D1S LED →
High Beam	9005 LED	Buy 9005 LED →
Fog Light	9145 LED	Buy 9145 LED →
Brake Light	LED Bulb	Buy LED Bulb →
Side Marker	194 LED	Buy 194 LED →
Turn Signal Front	3157K LED	Buy 3157K LED →
Turn Signal Rear	3057K LED	Buy 3057K LED →
Reverse Light	3057K	Buy 3057K →
Dome Light	2825	Buy 2825 →
License Plate	168	Buy 168 →
Map Light	2825	Buy 2825 →
Parking Light	3157K	Buy 3157K →
Trunk Light	579	Buy 579 →