What is the low beam headlight bulb size for a 1968 Jeep CJ5A?

The 1968 Jeep CJ5A uses a H6024 bulb for the low beam headlights. We recommend upgrading to LED for better visibility.

What is the high beam headlight bulb size for a 1968 Jeep CJ5A?

The high beam bulb size for the 1968 Jeep CJ5A is N/A.

Why are my 1968 Jeep CJ5A headlights dim?

Dim headlights on a 1968 Jeep CJ5A can be caused by aging halogen bulbs, which lose brightness over time, or oxidation (cloudiness) on the plastic headlight lenses. Upgrading to a H6024 LED conversion kit can provide a significantly brighter and whiter light output.

Which bulb fits the 1968 Jeep CJ5A fog light?

The 1968 Jeep CJ5A typically does not come with factory fog lights in all trim levels. If your vehicle is equipped with them, check the manual as sizes can vary by trim.

Is the 1968 Jeep CJ5A single or dual beam?

The 1968 Jeep CJ5A uses a dual bulb headlight system. This means you have separate bulbs for high and low beams.

Can I install LED bulbs on my 1968 Jeep CJ5A?

Yes, the 1968 Jeep CJ5A comes with standard halogen bulbs from the factory, but they can be upgraded to LED. You will need a H6024 LED conversion kit for the low beams.

Did the 1968 Jeep CJ5A change headlight bulb sizes from the previous year?

No — the 1968 Jeep CJ5A uses the same bulb sizes as the 1967 model. This configuration has been consistent across the 1967–1968 generation.

Is the 1968 Jeep CJ5A the first or last year to use H6024 bulbs?

The 1968 Jeep CJ5A is the last year in the 1967–1968 generation to use the H6024 bulb for the low beam headlight.

How do I change the headlight on a 1968 Jeep CJ5A?

Turn off the vehicle and open the hood. Locate the headlight assembly from behind, remove the dust cover or retaining clip, disconnect the wiring harness, twist the old H6024 bulb counter-clockwise to remove it, then insert the new bulb and reassemble. Note: Jeep vehicles use a CANbus system, so LED replacements may need an anti-flicker decoder. The whole process typically takes 10 to 30 minutes per side depending on accessibility.

Are LED headlights legal for a 1968 Jeep CJ5A?

LED bulbs used off-road or in auxiliary lights are legal everywhere. For on-road headlight use, legality varies by state. Many states allow LED retrofits as long as the beam pattern meets DOT standards. For the best legal compliance, choose a DOT-approved H6024 LED kit that is designed as a direct replacement and produces a proper cutoff pattern without excessive glare.

How much does it cost to replace 1968 Jeep CJ5A headlights?

A pair of halogen H6024 bulbs costs $15 to $40, while LED conversion kits run $25 to $60 per pair. If you have a shop do the work, expect an additional $20 to $50 in labor per bulb. Replacing them yourself at home saves the labor cost and usually takes under 30 minutes.

What is the difference between halogen and LED for a 1968 Jeep CJ5A?

Halogen bulbs produce a warm yellow light (around 3200K), last 500 to 1000 hours, and draw more power. LED bulbs emit a brighter white light (5000-6000K), last 25,000+ hours, and use less energy. LED upgrades for the H6024 position are available as direct plug-and-play replacements. Since the Jeep uses CANbus monitoring, choose a CANbus-compatible LED kit to avoid dashboard errors.

The 1968 Jeep CJ5A is the last model year to use this bulb configuration (1967–1968).

Fitment Guaranteed for 1968 Jeep CJ5A

What Size Bulbs Does a 1968 Jeep CJ5A Use?

Correct headlight, fog light, and tail light bulb sizes. Sourced from OEM catalog data.

Installation Difficulty

Easy (Plug and Play)

Est. Replacement Cost

$15 - $40 (Halogen) / $30+ (LED)

What Lighting System Does the 1968 Jeep CJ5A Have?

When it comes to nighttime visibility, the 1968 Jeep CJ5A relies on an arrangement of 1 specialized bulbs. It features a standard lighting system powered by a dual-bulb halogen configuration using separate H6024 low beam and high beam bulbs for precise light distribution. This model belongs to the late years of the CJ5A's 1967-1968 production span. Note that Jeep vehicles typically feature a CANbus electrical monitor that checks for specific bulb resistance.

LED Flicker Warning

This vehicle is known to use a CANbus system. Installing standard LEDs may cause flickering.

Use a CANbus decoder.

Can You Put LED Bulbs in a 1968 Jeep CJ5A?

For a Jeep built for the road and trail, LED upgrades provide the high-contrast lighting needed for better obstacle detection. We recommend starting your upgrade with the H6024 low beams, as they see the most use. Adding a matching LED kit later will complete the look and ensure consistent lighting performance. Because Jeep utilizes a CANbus system, standard LED bulbs may cause "bulb out" errors on your dashboard. Always opt for "Error-Free" or CANbus-ready kits which include the necessary resistors.

1968 Jeep CJ5A Bulb Size Chart

Position	Bulb Size	Shop
Low Beam	H6024	Buy H6024 →

How do the 1968 Jeep CJ5A's bulbs compare to other years?

The 1968 Jeep CJ5A uses the same bulbs as the 1967 model.

This bulb configuration covers the 1967–1968 model years. ← 1967

Finding the best installation guide...

Other CJ5A Years

1967

Other Vehicles That Use H6024 Bulbs

2006 Hummer H1 1998 Bentley Turbo R 1997 Mazda Miata 1996 Mazda MX-5 Miata 1995 Land Rover Range Rover 1991 Mitsubishi Montero